RyhamPaper Brake Bleeder Kit with Hand Vacuum Pump and 73 inch tube Air and Brake Fluid Changer for sedans, motorcycles, trucks, SUVs

Car Brake Fluid Change Tool Car Brake Fluid Change Kit Car Brake Pump Oil Change Extractor Tool for Car Motorcycle
Material：Plastic + Silicone + Metal
Bottle capacity：300ml
Length of hose：185cm/73inch
Air inlet：1/4" air quick plug
Package Included：
1 x Brake Fluid Replacement Tool

How To Use：
1. There's a little screw-on diaphragm part you need to put where the tool outputs air, so screw that on and make sure the red cap is inserted on the bottom of the bottle and make sure the bottle itself is tightened well.
2. Connect the hose to the bottle. First, suck out all the old fluid from the reservoir but don't go too crazy leave some fluid in there so the system doesn't go too dry so you don't introduce air.
3. Fill up the reservoir up to the top with fresh dot 3 or 4 fluid whichever your vehicle needs and close the cap.
4. Locate the bleeder valve on the caliper, remove the protective rubber, and plug the tool into the plug' using the black attachment on the hose. Make sure the attachment is in all the way on the hose and is also snug onto the bleeder valve.
5. Turn on the air valve on the tool before opening the bleeder valve and keep the tool and hose above the valve to allow any air in the lines to travel upward.

Instructions for Use:
If your pump is on the front, start from the rear right wheel, the rear left, then the front right, and the front left. Some vehicles have pumps in the back so you can start from a front wheel.
Please turn on the air valve on the tool before opening the bleeder valve and keep the tool and hose above the valve to allow any air in the lines to travel upward.
While it bleeds always check the reservoir and re-fill it with new fluid, don't let it go dry.
When bleeding is done, please close the bleeder valve first then shut off the air valve on the tool.
The bleeding process will be slow. You will see dark fluid coming into the bottle. You'll want to keep it going until you fill up about half the bottle from each wheel for a nice flush and eventually you will see clear new fluid building up on top of the old dirty fluid on the bottom.