OTVIAP 3000 Watts Power Inverter, DC 12v To AC 110V Car Inverter Dual With 4.1A 2 USB Ports

Specification

Condition: 100%

Item Type: Car Inverter

Material: ABS

Color: As the Picture Shown

Input Voltage: DC 10.5V-15V, (When the battery voltage is lower than 10.5V, the inverter is low voltage protection, when the battery voltage is higher than 15V, the inverter high voltage protection)

Optional Output Voltage : AC 110V, AC220V

Output Frequency: 60Hz for 110V model.

Peaks Power : 3000W

Rated Power: 300W

Output Waveform: Modified Sine Save.

8 Safety Protection Function: Reverse polarity protection, low input voltage protection, high input voltage protection, over-current protection, short circuit protection, over temperature protection, overload protection, internal .

Instruction:

What Size Power Inverter Do I Need?

The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you'll need (at least 10% to 20% more than your largest load).

CAUTION:

1.This is a modified sine inverter,NOT applicable for devices which work by built‑in motor, hair dryers,air conditioners, coffee machine,water pump, induction cooker,refrigerators and microwave ovens etc.Make sure that the total rated power of the connected devices is ≤ 400W

2.Tighten the Positive (+) and Negative (‑) terminals when the car converter is in use

3.If the converter is directly connected with the cigarette lighter. The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Clips to a battery ,because car cigarette lighter might not afford power over 150W.

4.The car converter suitable for DC12V and Car ONLY, not applied for DC 24V and airplane

5.Please do not leave the inverter in the ON position before car start.It's easy to damage the inverter before connected to the battery.The correct operation is connect to the battery first and then turn on the inverter switch

6. It's normal for the inverter to become warm while you are using it.In order to get the best using results, please put the inverter on the flat surface The working place should meet the following criteria:

(1) Keep dry, should not let the inverter contact the water or other liquids, keep the inverter away from moisture or water.

(2) Cool environment, keep the temperature between 0 Celsius degrees and 40 Celsius degrees. Do not put the inverter next to heat vents or other devices. Try to keep the inverter not be shined directly by the sunshine.