OSOYOO Python Hardware Programming Learning Kit for Raspberry Pi Pico with MicroPython and Graphical Programming Tutorials

OSOYOO Python hardware Programming Learning Kit

Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces.

It is built on RP2040, a brand-new chip developed right here at Raspberry Pi. Whether you’re looking for a standalone board for deep-embedded development or a companion to your Raspberry Pi computer, or you’re taking your first steps with a microcontroller, this is the board for you.

For the Pico, we created the basic starter learning kit. We have prepared many interesting and practical projects for you, and collected a lot of authoritative related information, just turn on your computer and you can complete programming learning.

Raspberry Pi Pico Features :

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom

• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz

• 264KB of SRAM, and 2MB of on-board Flash memory

• Castellated module allows soldering direct to carrier boards

• USB 1.1 with device and host support ,Low-power sleep and dormant modes

• Drag-and-drop programming using mass storage over USB

• 26 × multi-function GPIO pins, Accurate clock and timer on-chip

• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels

• Temperature sensor,Accelerated floating-point libraries on-chip

Easy to use

We have prepared the soldered pico board and micro USB cable, after receiving , you can connect to the computer for operation

Button controls LED

Using button to control LED lights. Learning how to read digital data from a Pico digital pin and output 0/1 data to Pico digital pins

Display temperature on I2C LCD

In this lesson, we will show you how to send temperature information from Pico to I2C LCD screen.

I2C is a very popular protocol which can exchange data between computer (Master) and its external devices(Slave).

Make Intruder Alarm System

Using PIR motion sensor to detect human movement. Once an intruder’s motions is detected, then Pico will trig a buzzer alarm. This is a typical application used in many home security system.

Using SPI port to access RFID

Use the RFID module to make a security access control system, so as to learn the RFID communication protocol SPI to send data to Pico.

Programming Languages and Tutorials

• We have how-to videos, PDF and online tutorials that make it easy for anyone to learn how to use the Pico.
• We offer 3 programming languages: MicroPython 、 Arduino (C / C ++) and Piper (graphic programming). You can view different tutorials as needed.