MILES NIMBUS 220 (INDUSTIAL GEAR OIL)(35) PAIL

Miles NIMBUS Lubricants are premium quality gear and lubricating oils blended from high Viscosity Index Exxon/Mobil base oils. These oils contain additive systems which impart the superior lubricating characteristics required for gear lubrication, bearing lubrication, slides, ways and chain drives. NIMBUS Gear Lubricants, through the combination of highly refined base oils and up-to-date additive technology, are more economical than oils of lesser quality and lower initial cost. Using NIMBUS, in conjunction with a proper maintenance program, will result in longer equipment life. Both maintenance cost and downtime may be significantly reduced through the use of NIMBUS gear lubricants.RECOMMENDED FOR: Miles NIMBUS E.P. Gear Lubricants may be recommended for the following applications: - Gear lubrication including spur, helical, bevel and worm gears- Bearing lubrication including plain, ball, roller and sleeve bearings- Any application requiring A.G.M.A./E.P. Gear Oil- Any application requiring Shell Omala, Texaco Meropa, Mobil Compound, MobilGear, Exxon Enmist,Penoled or Spartan TYPICAL TEST DATA:AG MA6EPISO Grade320Flash, COC, F, D92450Pour Point, F, D970Copper Corrosion, D130PASSFoam tendency/stability, ml, D8920/0FZG Load Staqe, pass, D518212Timken OK Valve, lb. D278260Four Ball EP, Scar Diameter, mm2, D2783Four Ball EP, Load Wear Index, kg, D2783Four Ball EP, Weld Point, kq, D27830.360315Rust Protection, distilled water, D 665APASSRust-Preventive TestSynthetic Sea Water, D665BPASSDemulsibility, D2711Free Water, mlEmulsion, ml84.9Trace