Product Description:
Sealant Tools are good suitable for more different sealing jobs, to any edge, corner and joint.
It does not grow mold, and keeps the corners clean and clean, preventing dust, insects and oil from entering hidden corners.
Product Specification:
Length: 3m
Width: 3.8cm
Package Includes:
2 * Self Adhesive Caulk Strip
How to Use:
1. Please completely clean the surface and make sure it is dry, remove any existing silicone caulking prior to installation.
2. Measure the length of the area to be sealed to determine the correct length and cut the strips accordingly.
3. Take out the strip, measure the same length as the area and mark on the strip with the pencil, then cut it.
4. Peel off 5cm of the adhesive tape from the back of the product and fold into 90 degrees, and then put the strip on the place where you need to seal, keep peeling the tapes until you finish the installation.
5. Cut the butt joint side into 45 degrees when the product needs to be pasted in a 90 degrees corner.
6. Room temperature around 25 Centigrade for the best, if the temperature is too low, use hair dryer to heat up the paste before sealing for better sticking.
7. While installing, press firmly over the length of caulk strip to ensure a tight seal.
WARNING: 