Shurtape AF-975CT Cold Temperature Aluminum Foil Tape: 2 in x 50 yds. (Silver)

Shurtape AF-975CT Cold Temperate Aluminum Foil Tape is for use in temperatures ranging from -20F to 260F when joining and sealing aluminum-backed or fibrous insulation and metal ductwork, as well as when repairing metal and sheet metal. AF 975CT is linered, designed with an acrylic adhesive, tested in accordance with UL 723 and delivers an airtight seal every time.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 46m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: dead soft aluminum foil
- Adhesive: cold temperature, white acrylic-based adhesive
- Release Liner: non-contaminating, siliconized, flat, white, paper
- Standards Met: FSI 0/SDI 0; UL 723
- Thickness: 7.3 mils (carrier, adhesive, liner) 4 mils (carrier, adhesive) 2 mils (carrier)
- Adhesion: 64 ounces per inch (to stainless steel test panel)
- Tensile Strength: 18 pounds per inch (longitudinal)
- Service/Operating Temperature: -20F to 260F
- Elongation: 3 %