LPS 3 Premier Rust Inhibitor 11 oz Aerosol 00316

Lps Laboratories 00316 LPS 3 Heavy-Duty Rust InhibitorLps Laboratories 00316 LPS 3 Heavy-Duty Rust Inhibitor Features:; Protects up to two years; Stops rust and corrosion; Provides non-sling lubrication; Nonflammable propellant; Self-healing waxy film; Provides anti-seize coating; Safe to use on rubber fabric plastics and paints; 11 oz aerosol.

Forms a transparent soft waxy film for and lubrication

Inhibits rust and corrosion; protects steel parts indoors for up to 2 years

Inhibits exfoliation and filiform corrosion of aluminum

Penetrates to displace moisture

Does not contain chlorinated solvents or silicone

Nonconductive

Safe on most surfaces

Meets NSF requirements for H2 Registration: 129027 (aerosol) 059849 (bulk)

Accepted by the Canadian Food Inspection Agency - Category n1

Inverta Spray Valve

Specifications

Meets or Exceeds these Airframe Specifications

Boeing BMS 3-23 G Type II

DMS 2150

Lockheed G39.2004

Mil-PRF-16173D Grade 2 Class 1

Airbus TN A.007.10138 Type 1 Grade 2

NSF Registered Category Code H2 Registration No.: 129027

Canadian Food Inspection Agency (CFIA) approved

Appearance/Physical State: Opaque brown liquid

Dielectric Strength (ASTM D-877): 19.5 kv

Flash Point (TCC): 100 F(40 C) minimum

HMIS: 120

Humidity Cabinet Test(ASTM D 1748):: No rust on 1029 steel panels after 30 days

Pour Point: 0 F(-18 C)

Propellant: Carbon Dioxide

Salt Spray Cabinet Test (ASTM-D-117): No corrosion on 2024-T3 aluminum panels after 1500 hours

Specifc Gravity(water=1): 0.82 0.86

Typical Dried Film Thickness:: 50-100 microns(2-4 mils)

Viscosity at 25 C: 200-600 cps