APR SUS00021 Roll-Control Lowering Springs

Compatible with 2019+ Volkswagen® Jetta® GLI. These Lowering Springs are not created or sold by Volkswagen®. Sold as a Set.;

APR Roll-Control Lowering Springs greatly improve looks and handling without greatly sacrificing comfort or your wallet! Designed for use with DCC or Non-DCC dampers, our performance lowering springs are a direct plug-and-play upgrade that offer a lower center of gravity and increased spring rates to reduce body roll. Many lowering springs on the market today simply lower your vehicle and give a false sense of improvement by feeling overly stiff. We took a different approach with our design. We extensively track and street tested several iterations to deliver a system that not only makes your GTI look great, but does so while delivering a comfortable experience that doesn't constantly compress and ride on the bump stops or crash and bottom out the dampers. Through a proper ride height configuration, we're able to greatly increase spring rates for improved handling, but do so without leaving the ride harsh, bouncy, and uncomfortable. Your GTI will be planted with a minimal impact on comfort. It's a system you'll love the second you're behind the wheel! These springs were designed in house and manufactured in the USA using a premium high tensile chrome silicon steel for excellent resilience against sagging and failure for years to come. Each spring comes powder coated in our signature red color, further protecting the spring from the elements. The front and rear springs are a dual rate spring that will operate as a single rate, linear spring, under normal loaded driving situations. All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2020 MK7 Jetta GLI (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 GLI, it will fit other similar platform vehicles. For maximum handling, performance, and comfort, combine with APR Bumpstops (SUS00025). Specifications: US 2020 MK7 GLI (DCC) Front: 383 mm (OEM) vs 349 mm (APR) or a 33 mm reduction in CF Height 215 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate US 2020 MK7 GLI (DCC) Rear: 375 mm (OEM) vs 337 mm (APR) or a 38 mm reduction in CF Height 227 lbs/in (OEM) vs 362 lbs/in (APR) or a 59% increase in Spring Rate;