Jewelry Pearl Drilling Machine Stone Making Equipments Bead Polishing Tools 280W

Jewelry Pearl Drilling Machine Stone Making Equipments Bead Polishing Tools 280W

Description

When we walk into a jewelry store, a dazzling array of jewelry often attracts our attention. At this moment, our pace slows down and our hearts are satisfied. A piece of beautiful jewelry can not be separated from powerful drilling. Our pearl drilling machine is made of fine materials and workmanship, so we can provide you with quality assurance. High efficiency and simple operation procedures can provide symmetrical and exquisite jewelry in a short time.

Details

1. Bead Holder: This accessory enables the drilling machine to drill holes without regular cleaning of pearl powder chips, so as to ensure the long-term normal use of the drilling machine.
2. Needle Chuck: The product is equipped with twist needles of different sizes, with diameters of 0.02inch, 0.03inch, 0.02inch, 0.04inch, and 0.047inch respectively. When punching, you need to insert the needle slowly to avoid twisting the needle or breaking the bead.
3. Anti-slip Foot Mats: The drilling machine is equipped with a stable base with four foot mats made of cast iron, which can play the role of anti-slip and make the drilling machine run more stably, so your jewelry will not be damaged due to misoperation.

Application

The product is applicable to natural or synthetic jewelry with a diameter of 3-35mm/0.12-1.38inch, such as freshwater pearls, seawater pearls, South China Sea pearls, Tahiti black pearls, pearl oysters, coral, amber, gold, silver, copper and other accessories. At the same time, the product can also be widely used in jewelry stores, jewelry manufacturers, etc.

How to Install

1. Install the depth regulator
2. Install the auxiliary handle.
3. Install the clamp.
4. Install the plastic round handles on both sides and adjust the spacing between the clamps.
5. Install the bottom dust hole.
6. Plug in the voltage and adjust the distance.

Specifications

Color: Black+ Yellow+Green
Model: KYD
Overall Material: Aluminum
Material of Foot Mat: Cast Iron
Material of Motor: Pure Copper
Material of Collets and Drill Bit: Plastic and Copper
Type: Jewelry Tools
Plug Type: US Standard
Voltage: 110V
Power: 280W
Speed: 0-15000 rpm
Suitable Diameter of Jewelry: 5-35mm/0.2-1.38inch
Diameter of Needles: 0.5mm/0.02inch, 0.8mm/0.03inch, 0.6mm/0.02inch, 1mm/0.04inch, 1.2mm/0.047inch
Clamping Range: 0.3-4mm/0.012-0.16inch
Gross Weight: 4.85kg/10.69lbs
Net Weight: 4.5kg/9.9lbs
Product Size: 23.5cm*10cm*11cm/9*3.9*4.3inch
Package Size: 30*20*20cm/11.8*11.8*7.87inch

Package Included

1 * Pearl Drilling Machine
1 * Pedal Switch
1* Bilingual Instructions(English+Chinese)
1* Tool Box
All Accessories for Use

Notes

1. Please strictly follow the instructions when you use this product.
2. Please tighten everything, including your pearl and needle!
3. Make sure that the drill bit has been tightened with T-lock and is in the center position.
4. You can use a very small stream of water to prevent cracking, and prevent the drill from being destroyed.
5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.