JVCC E-Tape-SC Electrical Tape: 3/4 in x 30 ft. (Black)

JVCC E-Tape-SC Electrical Tape is a general-purpose all-weather black PVC film electrical insulation tape with an aggressive rubber resin adhesive. As the title suggests, this tape is wound on a smaller 1-inch inner diameter core. E-Tape-SC Electrical Tape is most commonly used for wire and cable insulation and bundling. Electrical tape is frequently used to install low voltage cabling such as voice, data, video, alarm, and access control cabling. This tape is UL/CSA listed and is not flame retardant.

Electrical tape, as known as insulating tape, is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. As it is easily torn by hand, can be written on, and generally removes from smooth surfaces cleanly, it is useful for a number of other applications such as labeling and temporarily attaching objects to one another. Electrical tape can be used to wrap tools or other items, such as drumsticks, for added grip.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 19mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information
- Core: 1 inch diameter
- Backing/Carrier: plasticized polyvinyl chloride (PVC) film
- Adhesive: rubber resin
- Standards Met: UL/CSA listed
- Thickness: 7 mils (carrier, adhesive)
- Adhesion: 18 ounces per inch (to stainless steel test panel)
- Tensile Strength: 18 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 176F
- Elongation: 200 %
- Dielectrical Breakdown: 8KV