For Samsung Galaxy A54 SM-A546B Incell LCD Screen Digitizer Full Assembly with Frame (Not Support Fingerprint ID)
Notes and
Tips before installation 1. Please test it before installation.
When testing, do not remove any protective film or labels. Pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself with an electrostatic discharge (ESD) strap. This will prevent static electricity from damaging the electronic components within the phone.
Be sure to wear eye protection and be careful not to cut your finger with glass splinters.
Tip 2: Simulate a test.
Replacing the screen is very fragile product. We strongly recommend test before installation. Please simulate testing, that is, mobile phone apart (audio cable connected to motherboard, LCD or screen and new audio cable, new replacement, power on, test finished). If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not bend the cable.
Make sure the LCD cable is not over-bent.
If bent more than 90 degrees, the screen will darken.
About the product 1. LCD touch screen digitizer assembly with frame, replacement part
2.
Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever
4. Fully fits and works
5. Each item has been checked and is in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
7. Note: There is no fingerprint identification
(not support fingerprint identification)
