Hubcentric Rings (Pack of 4) - 66.9mm ID to 73.1mm OD - Silver Aluminum Hubrings - Compatible with Cadillac Chevrolet GMC Buick with 66.9mm Vehicle Hubs and 73.1mm Wheel Centerbore

StanceMagic Hub Centric Rings made of CNC Machined billet aluminum. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.

HUB RING INNER DIAMETER: 66.9mm (Your vehicle's hub lip diameter needs be this size)

HUB RING OUTER DIAMETER: 73.1mm (Your wheel's center bore needs to be this size)

Compatible with Chevrolet 2010-2023 Camaro, 2020-2023 Corvette, 2010-2017 Equinox, 2014-2017 SS. Compatible with Cadillac CTS CT5 CT6 XTS XT4 XT5 XT6. Compatible with 2011-2017 Buick Regal. Compatible with 2010-2017 GMC Terrain. Compatible with 2008-2009 Pontiac G8.

IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.

WHAT ARE HUB CENTRIC RINGS?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.

WHY DO I NEED IT?
You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.

HOW CAN I CONFIRM FITMENT?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 66.9mm. This should match your vehicle's hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 73.1mm. This should match your wheel's centerbore.


COMPATIBILITY INFORMATION:
These hubrings can fit vehicles with a 66.9mm Hub. Your Wheel Bore must be 73.1mm. Message us with year/make/model if you have any fitment questions.

IMPORTANT NOTES - BUYERS ARE REQUIRED TO CHECK BEFORE PURCHASING
- Buyers must ensure their Vehicle's Hub is 66.9mm.
- Buyers must ensure their Wheel's Centerbore is 73.1mm.
- If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.

INSTALLATION ADVISORY
Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.