Hero image 0 of Adjustable Handrail 156cm Bathroom Bathtub Grab Bar Shower Safety Handle Rail Tub Assist, 0 of 12

Adjustable Handrail 156cm Bathroom Bathtub Grab Bar Shower Safety Handle Rail Tub Assist

(No ratings yet)

Key item features

Specs

Bathtub rail & bar type
Bathtub Grab Bar
Features
Adjustable
Material
Aluminum
Color
Black
Installation required
Y
Assembly req
Y

Current price is $93.70

Price when purchased online

Out of stock

How do you want your item?

Out of stock

Report an issue with this seller

About this item

Product details

Adjustable 156cm Bathroom Bathtub Grab Bar Shower Safety Handle Rail Tub Assist

Product Parameters:

Product Size: 46.7*11.3*120-156cm (18.39*4.45*47.24-61.42inch)
Material: the Upper Part Is Made of Aluminum, and the Lower Part Is Painted with Steel Pipe
Regarding Load-bearing, It Is Just a Handrail. If It Is Installed Firmly, It Has Strong Load-bearing Capacity.

Product Features:

1.Universal to All Spa Tubs.
2.Coated Strong & Steady Support Foot, Coated Aluminum Handrail to Avoid Rust
3.304 Stainless Steel Screws. Easy Installation.

Installation Steps:

1> Choose Your Favourite Position of the Tub, Push the Flat Foot Under the Tub. Twist 6 Wood Screws on the Ground Through the Holes on the Foot.
2> Put the Pvc Stopper to the Middle of the Connecting Tube, and Put the Connecting Tube into the Support Feet Until the Stopper Meet the Top of Support Foot.
3> Put the Square Cover (Cabinet Connecting Kit) on the Connecting Tube Until It Slide on the Pvc Stopper, 2 Half Round Holes Should Face the Cabinet.
4> Put the Handrail on the Connecting Tube, Choose the Suitable Height by Moving the Pvc Stopper, Fasten the Pvc Stopper by 4 Tek Screws Finally.
5> Put the Flat Plate (Cabinet Conecting Kit) on the Tub Wall to Face the Square Cover, Tighten It on the Tub Wall by 4 Wood Screws. Twist 1 Set of Nut & Washer to the Bottom of Shafts, Let the 2 Shafts Meet the 2 Half Round Holes.
6> Twist the 2nd Sets Nuts & Washer on the 2 Shafts, Twist All the Nuts (in & out of Square Cover) to Fasten the Square Cover.
7> Fasten the Cover with Tube Through the Screw Hole on the Cover by 1 Tek Screw, and Fasten the Hand Rail with Connecting Tube by 3 Tek Screws Through the 3 Holes on the Handrail.
8> Push the Big Plug on the End of Handrail, All Small Black Caps on All the Screw Heads, Assemble Completed.

Packing List:

Cabinet Free Support Bracket*1
Handrail Tube*1
Cabinet Bracket*1
Pvc Pivot Stopper*1
2/5" Nuts（M10）*4
2/5" Washers*4
Foam Grip*1
Tube End Cap*1
1" Black Tek Screw（5* 18mm）*6
1" Wood Screw（5* 30mm）*10
Black Pvc Push Cap*12
Phillips Driver（5* 60）*1
Drill Bit（3.2mm）*1

Adjustable Handrail 156cm Bathroom Bathtub Grab Bar Shower Safety Handle Rail Tub Assist

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Bathtub rail & bar type

Bathtub Grab Bar

Features

Adjustable

Material

Aluminum

Color

Black

Directions

Instructions

1> Choose Your Favourite Position of the Tub, Push the Flat Foot Under the Tub. Twist 6 Wood Screws on the Ground Through the Holes on the Foot.\n2> Put the Pvc Stopper to the Middle of the Connecting Tube, and Put the Connecting Tube into the Support Feet Until the Stopper Meet the Top of Support Foot.\n3> Put the Square Cover (Cabinet Connecting Kit) on the Connecting Tube Until It Slide on the Pvc Stopper, 2 Half Round Holes Should Face the Cabinet.\n4> Put the Handrail on the Connecting Tube, Choose the Suitable Height by Moving the Pvc Stopper, Fasten the Pvc Stopper by 4 Tek Screws Finally.\n5> Put the Flat Plate (Cabinet Conecting Kit) on the Tub Wall to Face the Square Cover, Tighten It on the Tub Wall by 4 Wood Screws. Twist 1 Set of Nut & Washer to the Bottom of Shafts, Let the 2 Shafts Meet the 2 Half Round Holes.\n6> Twist the 2nd Sets Nuts & Washer on the 2 Shafts, Twist All the Nuts (in & out of Square Cover) to Fasten the Square Cover.\n7> Fasten the Cover with Tube Through the Screw Hole on the Cover by 1 Tek Screw, and Fasten the Hand Rail with Connecting Tube by 3 Tek Screws Through the 3 Holes on the Handrail.\n8> Push the Big Plug on the End of Handrail, All Small Black Caps on All the Screw Heads, Assemble Completed.

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.