For Nissan Titan 2004-2010 2011 2012 2013 2014 2015 Lighting 3600lm 899 880 LED Fog Light Bulbs, 6000K Xenon White Xtreme Super Bright PG13 Base 884 885 887 893 H27 H32

Features :

✅ LED Bulbs : 880 Fog Light, LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
✅ Application: Especially designed for upgrading Fog light, and Daytime Running Light.
✅ High Brightness: Top LED chips with 20W per bulb. Cool white 6000K. High luminous efficacy, 300% brighter than your stock Halogen Bulbs.
✅ 360 Degree Lighting: 360 degrees full angle light bring you an astounding emitted light effect. Glass projector lens design for maximum light output and better focusing light effect.
✅ Features: No delay to light up, Faster on/off response time.
✅ Long Lifespan: Aluminum heat sink design, Longer Lifespan. The built-in automotive circuit prevents electronic interference.
✅ Safety: Energy saving, environmental protection, Stable performance, through strict tests, Use safer driving in the car.

Specifications:

• Bulb Socket: 880/899
• Power: 20W/Bulb ; 40W/Pair
• Lumen: 1800LM/Bulb ; 3600LM/Pair
• Color Temperature: 6000K White
• Voltage(V): DC 9V-32V
• Working temperature: -40℃~+80℃
• Beam Angle: 360°
• Waterproof Level: IP67
• Material: Aviation Aluminium
• Cooling: Fanless physical cooling
• Super Long Service Life: ≥30,000 Hours
• Canbus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
• Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.

🚙Package Included:

2 x 880 LED Fog Light Bulbs
Randomly send new and old packaging boxes

Installation Notes:

1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp