Fixdono Wireless Microphone System, Dual Handheld Cordless Dynamic Microphones for Singing Karaoke, Speaker, Conferences, Wedding, Church, 328 ft

Impressive Range: Enjoy up to 330 feet of wireless freedom. This karaoke microphone wireless lets you move effortlessly, delivering seamless performances indoors or outdoors—no more limits, just smooth, uninterrupted fun!

Excellent Sound Quality: This microphone wireless deliver exceptional sound quality by effectively isolating the main sound source and reducing background noise. Its dynamic design and cardioid pickup pattern result in clearer and more accurate recordings.

Long Range Stable Transmission: Each cordless microphone has 25 adjustable channels and can transmit up to 330ft in open space, while using multiple wireless microphone systems without worrying about interference.

Sturdy & Durable: Our microphone karaoke feature a steel mesh grille for enhanced impact and corrosion resistance. The receiver box includes independent volume controls for each mic, offering precise sound management.

Plug and Play: Just turn on the receiver and mics, they will match automatically. Note: Not compatible with laptops, iPads, cell phones, or AV receivers. Each microphone requires 2 x AA batteries (included).

Perfect for Any Event: Whether it's home karaoke, weddings, church services, conferences, or small performances, this wireless karaoke microphone is your go-to choice for both indoor and outdoor use.

Receiver Operation Instructions:

1. Before turning on the receiver, do not power on the transmitter. First, adjust both the receiver and the mixer/amplifier volume to the lowest setting. Then, power on the receiver. The power indicator light on the front panel will light up, indicating that the unit is operating normally.

2. If the receiver’s SIGNAL indicator is on while the wireless microphone or transmitter is off, it means the receiver is picking up interference or noise from other signals. Once the corresponding channel's microphone or transmitter is turned on near the receiver and everything is functioning correctly, the SIGNAL indicator for that channel will light up.

3. Turn the receiver volume to the maximum setting, then adjust the amplifier's input volume knob to a suitable listening level. If the mixer/amplifier has more than one microphone input, you can use the comparison method to set the correct volume as follows: Connect both the receiver output signal and a wired microphone to the mixer’s input. Set the volume of the wireless microphone first, then adjust the amplifier's volume knob connected to the receiver to match the wireless microphone's level. Finally, adjust the receiver’s volume knob to match the wireless microphone volume. This method can be used for other input signals as well, ensuring consistent volume control when using multiple microphones on different channels simultaneously.

How to Use the Handheld Microphone:

1. Open the battery compartment and insert the batteries, ensuring they are aligned with the correct polarity. Once done, close the battery cover by turning it clockwise.

2. Set the power switch on the top of the microphone transmitter to the "PWR" position. The power indicator light will turn on, indicating that the battery is installed properly.

3. To operate normally, turn the volume control to the "ON" position.

4. Once powered on, the receiver’s SIGNAL (RF) indicator light will immediately light up, showing that the signal is being received.

5. When the microphone is not in use, be sure to turn off the power by setting the switch to the "OFF" position to prevent battery drain. If the microphone will not be used for an extended period, it’s recommended to remove the batteries to avoid leakage, which could damage the battery contacts and internal circuitry.

6. If the indicator light dims or goes off, replace the batteries.

Package Includes:

2 * Wireless microphones for karaoke

2 * Anti-slip rings

1 * Receiver

1 * Receiver power cable

4 * AA batteries

1 * 6.5mm audio cable

1 * User manual