FeelGlad 20pcs Heavy Duty Adhesive Wall Hooks Removable Transparent Sticky Wall Hangers Waterproof Reusable Wall Hook for Bathroom and Kitchen

How to Use:

Clean and dry the wall before use. There is an arc angle along the corner of the hook, tear off the film cover from the arc angle. Ensure that you don’t touch the adhesive surface. Paste and press the adhesive surface from middle to edge in order to crowd out air. Test if it is stable enough and then hang things after 12 hours.

How to tear off the hook:

You can heat the adhesive surface with a hair dryer for a few seconds. (Note: stainless-steel hooks also get hot when heated. Do not touch the steel hooks when you tear off the adhesive surface of the hooks.) Slowly tear off the hook from the arc angle. Try to keep the surface from creasing when you tear it apart. Long time when not in use, please use a protective film to protect the adhesive surface.

Tips:

Please clean the adhesive surface with water if it has dust covered before re-paste the hook. Do not stick on the surface of water, dust, oil, wax or wallpaper wall or painted or plaster or cement surface. Do not get close to 80 degrees of high temperature. Do not hang overweight and dangerous fragile items on it. If the hook with sticky dirt is not good, please clean and dry after the original viscosity can be restored. Use the Hook after 12 Hours. The heavy-duty command hooks will be stronger. It needs a genuinely flat surface to attach to. They would not work well on textured plaster walls or uneven or pitted surfaces. If you mount these to wood, make sure wood has no polish residue.