Exlonjet Walnut 2" X 50' Roll Preglued, Wood Veneer Edge Banding, Flexible Wood Tape, Easy Application Iron On with Hot Adhesive. Smooth Sanded Finish Veneer Edging. Made in USA.

High quality wood veneer edge banding Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish. Real walnut wood pre-glued edge banding Our walnut wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent . The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive 1 roll of walnut wood, iron-on veneer edging with your purchase. Easy to install plywood edge banding The tool you need to apply this veneer edging is a regular household iron at cotton (hot) temperature. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron. Bandings are impregnated with a high-speed hot- glue that creates a permanent, durable . How to apply Exlonjet Edging 1. Prepare Surface Edge: Fill any large holes, sand rough spots, remove sawdust, cut edging ½" longer than surface to be covered. 2. Apply Edging: Preheat iron on “cotton” setting, position edging, slowly press iron over edging, check to see if glue is melting. Note: Use paper or aluminum to iron bottom. 3. Bonding: While still hot, press veneer down firmly with wood block or , If is a mistake, simply reheat and reapply. 4. Trim Edge: Allow edging to cool completely, trim any excess with an edge trimmer, a razor blade or file, sand smooth and finish as desired. BUY NOW this premium quality, walnut iron-on wood veneer edging