EZAccessory 2 Wheel Adapters 5x4.5 to 6x5.5 (5x114.3 to 6x139.7) Hub Centric Fit For Nisaan 6x5.5 Wheels With 100mm Bore Thickness 2 Inch

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 4.5-inch (114.3mm) bolt pattern hub to fit wheels of 6 lug 5.5-inch (139.7mm) bolt pattern. Adapters are built with 78mm hub centric lip. If your wheel has 100mm bore, the hub centric rings can help center on the lip for a factory fit. They will space out your wheels for 2-inch. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Hub centric design for a snug fit on factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 5x4.5 Pattern Hub or the Following Vehicles: Ford: Mustang (All 5 lug), Explorer, Ranger, Bronco (82-90), Crown Victoria Jeep: Cherokee (80-01), Grand Cherokee (93-98), Wrangler (80-06), Liberty (02-on) Toyota: Camry (92-on), Solara, MR2, Supra, Supra Hub Centric Fit with Hub Centric Rings for Factory Wheels (or 100mm Bore wheels) from These Vehicles: Nissan Xterra (00-04), Frontier (87-04), Pathfinder (87-04), Pickup (78-86) **Even if your 6x5.5 bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 5x4.5-inch (114.3mm) Wheel Bolt Pattern: 6x5.5-inch (139.7mm) Studs Thread Size: 14x1.5 Hub Bore Size: 73mm Hub Centric Lip: 78mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Hub Centric Ring OD 100mm Hub Centric Ring ID 78mm Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.