Double Sided Tape Heavy Duty, Nano Double Sided Adhesive Tape, Clear Mounting Tape Picture Hanging Adhesive Strips (16.5FT)

IMPORTANT TROUBLE SHOOTING ：

1. Please Note: it is not recommended to use it on unstable Paint Walls，rough walls, powdery walls, wet surfaces or uneven surfaces.

When using the tape on these surfaces due to strong adhesion and the nature of painted wall, which may peel off painted wall upon removal.

2. Before use -- Please keep the mounting surface dry, clean and free of oil when mounting to make instant and permanent bond and get great water and moisture resistance ability.

After use -- Press down hard and hold for 20 seconds after sticking. Make sure the tape is firmly attached to the surface, this will help maintain long-lasting stickiness .

3.How to remove --

Step one: Separate the item from the surface to be pasted -- Gently move item left/right，up/down until the item separates from the surface.

Step two: Peel off the tape from the item -- Using hot air from a hair dryer will soften the tape and make it easier to remove, then slowly peel the tape off the item.

4. Storing the tape in our 'reusable bag' can prevent the tape from sticking to the packaging box, making it easier to use next time.

Then put the packaged tape into our 'packaging box', which can effectively avoid direct sunlight and facilitate long-term storage.

5. To avoid possible damage, do not use the tape to hold heavy objects or valuables.

6. Keep this product out of the reach of children.

7. If the tape is directly exposed to sunlight for a prolonged period, the colour of the tape’s surface may turn yellow.

However, yellowing of the tape will not affect the normal use of the product, the adhesive properties of the tape will perform properly in use.

IMPORTANT: This is a permanent tape and may cause surface damage or leave residue when removed !!

Why is the tape not as sticky as you advertised?

The adhesive strength of the tape is related to these factors: surface, pressure, time, and temperature. For maximum bonding strength, please follow the recommendations below:

1. Clean the surface before applying and make sure that the mounting surface is clean, dry, smooth and free of oil.

2. Apply some pressure to the tape before peeling off the red backing, and apply final pressure to the mounting object after mounting is complete to create a strong, permanent bond.

3. For maximum bonding strength, please do not hang heavy objects immediately after tape application and be patient for another 72 hours.

4. Ideal tape application is accomplished when temperature is between 70° F and 100°F (21°C and 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended.