Simpson Strong-Tie 272229 22 oz Epoxy-Tie Anchoring Adhesive Cartridge

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification. 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508 Code listed under the IBC/IRC for masonry per IAPMO UES ER-265 Code-listed equivalent to cast-in-place reinforcing bars governed by ACI 318 and IBC Chapter 19 Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry Cure times: 24 hours at 70F 21C, 72 hours at 50F 10C Easy hole-cleaning no power-brushing required Suitable for use in dry or water-saturated concrete For best results, store between 45F 7C and 90F 32C Available in 8.5 oz., 22 oz. and 56 oz. cartridges for application versatility Manufactured in the USA using global materials SET-XP is code listed for installation with the Speed Clean DXS drill bits without any further cleaning ICC-ES ESR-2508 Tested per ACI 355.4 and AC308