DC30D Generator Control Module Small Diesel Genset Controller Panel

Features:
* This series of controllers is dedicated to the start, stop, monitoring, default check and parameter setting of small diesel and gas generator sets.
* The controller has a dot for matrix LCD screen that can display various faults at the same time. Once the generator set cannot work properly, it will stop running.
* There are Chinese/English interfaces available, and more languages can be set according to user requirements. All parameters can be configured through the front buttons or adjusted using the USB programmable interface.
* Personal computer. It can be widely used in various automatic controls of generator sets.
* 32 groups of microprocessor technology.
* 1.8-inch 128*64 backlit LCD display, language interface optional (Chinese/English), user language can be set if necessary.
* PC front panel, waterproof, oil-proof, UV-proof, longer service life.
* USB interface: parameters can be set even without power.
* Parameters can be set through the front panel buttons.
* Collect and display various engine and generator parameters.
* Recording function: record related faults in real time.
* With 5 relay outputs, 3 of which are configurable, more than 10 functions can be for each channel.
* 1-channel switch input, up to 20 functions can be set for each channel.
* 3 sensor analog input interfaces, which can be set to various units.
* Customizable sensors through front panel buttons or PC software.
* Various crankshaft conditions (speed, frequency, oil pressure) can be set.
* Control and protection: automatic start and stop of generator sets, load transfer, complete fault display and protection. Standard waterproof rubber gasket. Waterproof grade can reach IP54.
* Modular design: All connections use European connectors, which are more convenient for installation, connection, maintenance and replacement.

Specifications:
Part name: DC30D generator set controller
Material: ABS, metal
Size: as shown in the figure
Body color: black
Parameter display: (as shown below)
Engine speed.
Engine oil pressure
Engine temperature
Engine oil level
Engine battery voltage
Generator voltage L-
Specified concentration
Generator current A
Generator frequency Hertz
Generator active power KW
Start success time
Current running time
Total running time
Level maintenance notice
Protection: (as follows)
Overspeed
Underspeed
Low oil pressure
High temperature
Low oil level
Sensor on.
Frequency too high
Frequency too low
Voltage too high
Voltage too low
Overflow
Maintenance due
Low water level
Start failure
Stop failure
Battery voltage too high
Battery voltage low
Typical wiring diagram
Note: Please do not move the battery during operation, otherwise the controller may be damaged!
Do not open the C.T. double-stage generator when the generator is loaded, otherwise the high voltage generated will endanger personal safety.

Package Contents:
1 x DC30D Generator Set Controller
1 x English User Manual
2 x Screws

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.