B&M 20413 Automatic Transmission Torque Converter Fits select: 1967-1968 CHEVROLET CAMARO, 1969-1986 CHEVROLET C10

HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

• Fits GM 1965 to 1991 TH400; 425; 375 and 1968 to 1981 TH350; 375B (not 350C) automatic transmissions
• New Springs/Rollers In Stator
• Auto Trans Torque Converter
• Steel Alloy Pump Drive Tube
• Between Stator and Turbine
• Heavy Duty Needle Bearing
• HOLESHOT 3000 TH400/350
• HOLESHOT 3000 TH400/350
• Furnace Brazed Impeller
• Furnace Brazed Turbine
• HOLESHOT 3000 TH400350
• Torque Converter
• New Turbine Hub
• 20413; Torque Converter; B/M; b and m; transmission; manual; automatic; shift kit; improver; transkit; racing; knob; lever; torque converter