Star Water Systems 1-1/2 HP 4200 gph Cast Iron Sprinkler Pump

My first irrigation pump but this is clearly a winner thus far. I am at a lift of about 5-6 feet and using a mix of rain bird 5004 (8 GPM orifices) and 425 (3 GPM orifices) valves with the 1.5 inch supply passing through 1" valves to 1" PVC supply lines, with 7-8 valves per zone. Works excellent and those 5004 valves (recommended) shoot 50 feet and more with distance screw turned down in many cases. Only down side on pump is mounting plate is close to motor and thus either need to mount with studs OR in my case, I bolted base plate on a pressure treated base (clearance for possible water) and remove the two mounting nuts holding motor to base plate. If I ever need to change pump I will likely replace base plate mounting bolts with studs and nuts. This pump has a lot of flow and I need to check pressure to get an idea of my flow rate to each zone. Pump is pretty quiet and would clearly buy it again without hesitation. Arrived quickly as well.