Instructions
1. Place the dryer on a level, heat-resistant table or countertop. 2. Open the lid and gently remove the power cord, hose and bonnet. 3. Connect the power cord to outlet. 4. Attach the hose to the bonnet by snapping the tabs on the hose locking ring into the locking ring on the bonnet. 5. Towel-pat and untangle wet hair to remove excess water and to shorten drying time. Elastic Bonnet Fan Setting Air Intake Grill Drawstring Hose Locking Ring Hose Bonnet Storage Compartment Temperature Setting 5 6. While the dryer is OFF, place the bonnet over hair and pull drawstring to tighten if necessary. The bonnet should not cover sensitive areas such as the ears and parts of the neck. 7. Turn the dryer ON by choosing either the HIGH or LOW fan setting. The HIGH fan setting is best for very wet hair; the LOW fan setting is for more gentle drying or touch-ups. 8. Select the HOT temperature setting. 9. For best curl results, select the WARM setting for a few minutes at the end of drying time to “set” the curls. 10. After use, take the bonnet off and unlock it from the hose. Let dryer, bonnet and hose cool down until they are no longer warm to the touch. Then fold the bonnet and store it in its compartment in the dryer case. Gently loop the power cord and store it in the case as well. DO NOT wrap the power cord around the dryer. 11. You can stand the dryer up on its side when not in use for easy storage.
