AirTechnik 97133-M5000 Cabin Air Filter w/Activated Carbon Fits 2019-2025 Hyundai Nexo - 97133-R0000

Activated Carbon Cabin Air Filters
AirTechnik engineers and designs our activated carbon air filters with quality, performance, durability, and cost in mind. AirTechnik cabin air filters keep your vehicle clean, smelling fresh, and helps with preventing particles from circulating in your vehicle to provide a clean and comfortable breathing environment. Cabin air filters are considered the front line of defense and provide a filtering barrier from the hazardous outside particles and elements that may enter the vehicle. Our activated carbon filters can remove dust and other particles ranging inside from 5 to 100 microns. Our filters also adsorb exhaust gas and road dust from entering the vehicle, which provides a clean air breathing environment inside the vehicle.
Please enter your vehicle information to verify the cabin filter fit your specific model.
Compatibility:
Hyundai Nexo 2019-2023
Hyundai Nexo 2019-2023
Driver and Passenger Health
Cabin air filters help provide a steady source of clean air to the vehicle for more breathing comfort for the passenger and driver.
Breathe Clean Air
Roadside air contains exhaust gas, dust and smog can be concentrated up to 2 to 6 times more in your vehicle than compared to outside.
Simple and Fast Replacement
When cabin filters become clogged with debris, it will obstruct clean air from circulating in the vehicle. Cabin air filter replacements take less than 15 minutes, and should be replaced every 12,000 miles, or annually. Installation instructions are included with each filter.
Cross reference:
Hyundai: 97133-M5000
Installation instructions:
Open the glove box and unlacth the cabin filter cover on the right side and remove it.
Remove the dirty filter by pulling it straight out and install the new filter.
Re-install the cabin filter cover and make sure it is latched on the right hand side of the cover.
Partially close the glove box and re-install.
Open the glove box and unlacth the cabin filter cover on the right side and remove it.
Remove the dirty filter by pulling it straight out and install the new filter.
Re-install the cabin filter cover and make sure it is latched on the right hand side of the cover.
Partially close the glove box and re-install.