AirVent 14 In. Aluminum Internally Braced Wind Turbine Attic Vent TIBS1400

The Air Vent Wind Turbine comes with a 12 inch opening and 95 sqquare inches of NFA. It is Miami-Dade approved. A non-electric alternative to ventilation, these vents use the natural force of wind and air pressure to spin and vent out stale attic air. They do it with a series of specially shaped vanes that catch the wind and provide rotary motion. This pulls hot, humid air from the attic. Turbine vents provide a low-cost ventilation alternative in areas where wind speeds of at least 5 mph are typical.

A guideline to keep in mind with the Air Vent Air Hawk is that homes require 1 square foot of net free area (the total unobstructed area through which air can enter or exhaust a non-powered vent) for every 150 square feet of attic floor space. If balanced between intake and exhaust vents, the requirement is 1 square foot of net free area for every 300 square feet of attic floor space.

Due to limitations of certain monitors, the colors you see on your screen may not be a totally accurate representation of the actual product. We strive to make our colors as accurate as possible, but screen images are intended as a guide only.