Aiqidi Instant Electric Hot Water Heater 110V 3000W Wall-mounted Under Sink Tankless Mini Boiler IPX4 Waterproof 20-50℃, Red

This mini water heater can quickly heat water in just a few seconds and has good safety, allowing you to enjoy a continuous supply of hot water in a limited space. It can make your daily washing and cleaning activities warmer, making your winter no longer cold. It is very suitable for installation in small residential areas, garages, offices, sinks, kitchens, apartments, bathrooms, RVs, terrace sinks, and other areas that require hot water but have limited space. It is suitable for different water pressures in different regions and can also be used in high-rise households.

Details

• Long Power Cord: The 3.44-foot power cord reduces usage restrictions and further protects your safety
• Touch Button: The electronically controlled touch button has excellent sealing performance and can work stably in humid environments for a long time
• Universal Interface: The international G1/2-inch interface is adopted for the water inlet and outlet, and the 0.78-inch outer diameter can be well adapted to a variety of water pipes, faucets, showers, etc

Specifications

• Model: XY-FC
• Color: Red
• Style: Modern
• Shape: Rectangle
• Material: Brass, ABS, 304 Stainless Steel, 316L Stainless Steel
• Surface Treatment: Pickling
• Plug: US-Standard
• Power Source: Corded Electric
• Water Inlet Mode: Bottom Water Inlet
• Mounting Type: Wall-Mounted, Floor-Mounted, Under Sink
• Temperature Regulation Range: 20-50°C/68-122°F
• Power Cord Length: 1.05m/3.44ft
• Assembly Required: Yes
• Number of Items: 1
• Power: 3000W
• Voltage: AC 110V
• Frequency: 50-60Hz
• Waterproof Level: IPX4
• Water Pressure: 0.04-1.2MPa
• Wire Request: Wire Cross Section ≥2.5mm²/0.0038in²
• Suggest Minimum Reserved Installation Space: 30*30*25cm/11.81*11.81*9.84in
• Product Size: 11.6*7*19.5cm/4.57*2.8*7.68in
• Tank Length: 16cm/6.3in
• Package Size: 23.5*9.5*18.5cm/9.25*3.74*7.28in
• Net Weight: 0.95kg/2.1lb
• Gross Weight: 1.1kg/2.42lb

Package Included

• 1*Water Heater
• 1*English Manual
• All Accessories for Assembly

How to Install

• 1.Drill holes in the wall. Insert the plastic expansion tubes into the holes.
• 2.Tighten the water heater with screws. The water heater must be installed vertically.
• 3.Connect the cold water inlet pipe to the inlet nipple and the water outlet pipe to the outlet nipple.
• 4.Before connecting the power, fill the tank and system with water and check for leaks.
• 5.Open the hot water faucet until constant water flows from them. Otherwise, damage to the element may occur.