Hero image 0 of Across International SE53 SolventVap 5.3 gal/20 L Rotary Evaporator with Motorized Lift, 220V, 4300W, 20 Amp, 0 of 5
Across International SE53 SolventVap 5.3 gal/20 L Rotary Evaporator with Motorized Lift, 220V, 4300W, 20 Amp
(No ratings yet)
Key item features
- SolventVap rotary evaporators come with all PTFE valves for solvent-resistant operations. We also lowered the height of assembled unit, for easy installation and ease of use and storage. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. Thats why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.
Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 130 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.
Digital water bath operates from ambient temperature to 99C (210F) with PID temperature control stepping at 0.1C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.
Standard Glassware Set includes 5.28 gallon (20 liters) round-bottomed evaporating flask, 2.64 gallon (10 liters) round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points. -
- ETL tested to UL and CSA standards. CE certification optional.
- Free dual condenser and dual receiving flask, a $3,000 value
- New condenser insulation sleeves increase safety by protecting lab personnel from injury, in case of shattered glass caused by thermal shock. They also protect glassware and increase cooling efficiency (included with rotovap purchase).
- Water bath cover enhances safety by protecting evaporating flask and the material inside; it gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
- New swivel casters can be adjusted for rotovap to stand securely on uneven floor.
- Come standard with a stainless steel 20L evaporating flask carrier with silicone cushions, custom made for Ai 20L SolventVap series rotary evaporators. This carrier can be placed on top of our 20L SolventVap's water bath for easy loading and unloading. It can also be used as a flask stand.
- Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
-
- Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
- Downward-condensing vacuum connection design ensures safe vacuum operation.
- Motorized water bath lifting for precise control.
- Easy, straight-forward visual operation with digital speed and temperature display.
- PID temperature controller ensures accurate temperature control is maintained.
- One year warranty on rotary evaporator except for glassware and all sealing gaskets.
Specs
- BrandAcross International
- Height50.000
- ModelSE53
- Lab evaporator typeRotary Evaporators
Current price is USD$9,500.00
Price when purchased online
- Free shipping
Free 30-day returns
How do you want your item?
Columbus, 43215
Arrives between Feb 23 - Feb 26
|
Sold and shipped by ACROSS INTERNATIONAL LLC
Free 30-day returns
Popular items in this category
Best selling items that customers love
Orbital and Linear Shaker, Digital Orbital Rotator Shaker with Brushless DC Motor, 20-500 RPM Speed, Max. Load Capacity 7.5 KG $699.99
Sponsored$69999current price $699.99Orbital and Linear Shaker, Digital Orbital Rotator Shaker with Brushless DC Motor, 20-500 RPM Speed, Max. Load Capacity 7.5 KG
Shipping, arrives in 3+ daysLab Shaker, 3D Shaker Compact Rotator Shaker with Adjustable Speed 0-100RPM, 0-8° Tilt Angle, Lab Shaker with Undulating 3D Motion, Non-Slip Mat, Max. Capacity 2KGS $259.99
Sponsored$25999current price $259.99Lab Shaker, 3D Shaker Compact Rotator Shaker with Adjustable Speed 0-100RPM, 0-8° Tilt Angle, Lab Shaker with Undulating 3D Motion, Non-Slip Mat, Max. Capacity 2KGS
Shipping, arrives in 3+ daysU.S. Solid Ultrasonic Homogenizer Lab Cell Disruptor Mixer Sonicator 150W 5-100ml $1,033.90 Was $1,229.90
5 optionsAvailable in additional 5 optionsNow$1,03390current price Now $1,033.90, Was $1,229.90$1,229.90You save $196.00You save$196.00Options from $1,033.90 – $1,998.00U.S. Solid Ultrasonic Homogenizer Lab Cell Disruptor Mixer Sonicator 150W 5-100ml
Shipping, arrives in 3+ daysMaksiwa International Boring Machine 1 Phase 110V 13 Spindle Manual Line $2,499.00
$2,49900current price $2,499.00Maksiwa International Boring Machine 1 Phase 110V 13 Spindle Manual Line
12 out of 5 Stars. 1 reviewsShipping, arrives in 3+ daysU.S. Solid Ultrasonic Homogenizer Processor Separate Type Sonicator Cell Disruptor Mixer 600W, Sample Volume 20-500mL $1,401.39 Was $1,630.29
Now$1,40139current price Now $1,401.39, Was $1,630.29$1,630.29You save $228.90You save$228.90U.S. Solid Ultrasonic Homogenizer Processor Separate Type Sonicator Cell Disruptor Mixer 600W, Sample Volume 20-500mL
Shipping, arrives in 3+ daysU.S. Solid 2-in-1 Touch Screen Ultrasonic Homogenizer Lab Cell Disruptor Mixer Sonicator 1800W 50-2200ml $1,635.99
7 optionsAvailable in additional 7 options$1,63599current price $1,635.99More options from $1,389.00U.S. Solid 2-in-1 Touch Screen Ultrasonic Homogenizer Lab Cell Disruptor Mixer Sonicator 1800W 50-2200ml
Shipping, arrives in 3+ daysHudson Hi-Fi Turntable Double Sided Cartridge Alignment Protractor Mat Includes Stroboscope Side $18.95
Sponsored$1895current price $18.95Hudson Hi-Fi Turntable Double Sided Cartridge Alignment Protractor Mat Includes Stroboscope Side
24 out of 5 Stars. 2 reviewsSave with
Shipping, arrives tomorrowMiumaeov Overhead Stirrer Height Adjustable Electric Overhead Stirrer Mixer Drum Mix Biochemical Lab Tool (100W) $72.99
$7299current price $72.99Miumaeov Overhead Stirrer Height Adjustable Electric Overhead Stirrer Mixer Drum Mix Biochemical Lab Tool (100W)
Shipping, arrives in 3+ daysWFCO WF-8955-AD WF-8900-AD Series Power Center - 55 Amp, 105-130 VAC, 60 Hz, 940W $274.99 Was $294.43
Now$27499current price Now $274.99, Was $294.43$294.43You save $19.44You save$19.44WFCO WF-8955-AD WF-8900-AD Series Power Center - 55 Amp, 105-130 VAC, 60 Hz, 940W
25 out of 5 Stars. 2 reviewsShipping, arrives in 3+ daysSquare D DefPurposeMagContactor,110/120VAC,2P,40A 8910DPA42V02 $82.72
$8272current price $82.72Square D DefPurposeMagContactor,110/120VAC,2P,40A 8910DPA42V02
Shipping, arrives in 3+ daysVan De Graaff Generator Replacement Belt $44.91
$4491current price $44.91Van De Graaff Generator Replacement Belt
0.0001g 0.1mg Analytical Balance Lab Digital Precision Scale 110V W/AC Adapter $283.65
$28365current price $283.650.0001g 0.1mg Analytical Balance Lab Digital Precision Scale 110V W/AC Adapter
Shipping, arrives in 3+ days0.0001g 0.1mg Analytical Balance Lab Digital Precision Scale 110V W/AC Adapter White for Laboratories $242.10
$24210current price $242.100.0001g 0.1mg Analytical Balance Lab Digital Precision Scale 110V W/AC Adapter White for Laboratories
Shipping, arrives in 3+ daysTorklift International Adjustable Glowstep All Terrain Landing Gear, Black $189.99
$18999current price $189.99Torklift International Adjustable Glowstep All Terrain Landing Gear, Black
15 out of 5 Stars. 1 reviewsShipping, arrives in 3+ daysCuadrado 5.5 ft 4-Cycle Gas Powered Walk Behind Power Edger with Heavy Duty Chassis $1,097.86
$1,09786current price $1,097.86+$99.99 shippingCuadrado 5.5 ft 4-Cycle Gas Powered Walk Behind Power Edger with Heavy Duty Chassis
15 out of 5 Stars. 1 reviewsShipping, arrives in 3+ daysK-Tool INT022 3.5 Ton Low Profile Service Jack; Dual Pump Piston $299.67
$29967current price $299.67K-Tool INT022 3.5 Ton Low Profile Service Jack; Dual Pump Piston
15 out of 5 Stars. 1 reviewsSave withShipping, arrives in 2 days
About this item
Product details
The Ai SolventVap series 20L rotary evaporators is now ETL tested to UL/CSA standard. This certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the new plexglass bath cover. Specially designed for Ai 20L SolventVap rotary evaporators, this beneficial cover securely rests on top of the water bath and ensures the best possible temperature uniformity.
- SolventVap rotary evaporators come with all PTFE valves for solvent-resistant operations. We also lowered the height of assembled unit, for easy installation and ease of use and storage. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. Thats why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.
Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 130 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.
Digital water bath operates from ambient temperature to 99C (210F) with PID temperature control stepping at 0.1C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.
Standard Glassware Set includes 5.28 gallon (20 liters) round-bottomed evaporating flask, 2.64 gallon (10 liters) round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points. -
- ETL tested to UL and CSA standards. CE certification optional.
- Free dual condenser and dual receiving flask, a $3,000 value
- New condenser insulation sleeves increase safety by protecting lab personnel from injury, in case of shattered glass caused by thermal shock. They also protect glassware and increase cooling efficiency (included with rotovap purchase).
- Water bath cover enhances safety by protecting evaporating flask and the material inside; it gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
- New swivel casters can be adjusted for rotovap to stand securely on uneven floor.
- Come standard with a stainless steel 20L evaporating flask carrier with silicone cushions, custom made for Ai 20L SolventVap series rotary evaporators. This carrier can be placed on top of our 20L SolventVap's water bath for easy loading and unloading. It can also be used as a flask stand.
- Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
-
- Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
- Downward-condensing vacuum connection design ensures safe vacuum operation.
- Motorized water bath lifting for precise control.
- Easy, straight-forward visual operation with digital speed and temperature display.
- PID temperature controller ensures accurate temperature control is maintained.
- One year warranty on rotary evaporator except for glassware and all sealing gaskets.
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it. Â
Specifications
Brand
Across International
Height
50.000
Model
SE53
Lab evaporator type
Rotary Evaporators
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Customer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
