Abatron 24 Oz LiquidWood WoodEpox Epoxy Resin Glue Compound Wood Restoration Kit

We were going to replace the bottom sweep on our aluminum clad wood patio door but discovered the door had severe wood rot on the bottom. This product saved us from having to spend thousands to replace the door. The product is easy to mix, apply and sand. It worked perfectly for the purpose we purchased it for. The bottom sweep is now secure on our newly repaired door. Couldn't be more pleased.

We purchased the Wood Resto Kit to fill some voids at the bottom of a 1941 sectional wooden garage door that was damaged likely in the 1960s, and at that time was covered over with plywood. To repair, we first had to get the broken boards into the same plane by clamping an oak board (cut to size) to the interior surface of the door, and then had to cinch the relationship together with regularly spaced wood screws that permanently held the oak to the damaged section. While doing so, we roughed up & cleaned surfaces with a wire wheel, slightly wet the surfaces, and applied liberal amounts of exterior grade wood glue. Once dried, we randomly screwed stainless screws below grade (to create keys that the WoodEpox could surround in order to lock it into place) in the void areas, and then mixed and applied the LiquidWood treatment and allowed it to thoroughly dry. Finally, we kneaded the two components of the WoodEpox together and applied it into the void. After ample drying, we sanded the WoodEpox flush with the surface using a random orbital sander, and applied two coats of oil primer, and thereafter two coats of high quality latex (plenty of binder in this paint). The result is that one simply cannot externally discern that there was ever damage to this area.