Hero image 0 of Maxxsonics MB Quart Formula 5.25" 2 Way Coaxial Car Audio Speakers (2 Pack), 0 of 2

Maxxsonics MB Quart Formula 5.25" 2 Way Coaxial Car Audio Speakers (2 Pack)

(No ratings yet)

Key item features

Quantity: 2
Manufacturer warranty: 1-year warranty
Aluminum dome tweeters deliver great sound with increased reliability
Butyl rubber surrounds provide durability and deeper mid-bass impact
Lightweight thermal-formed polypropylene cones enable faster midrange response
The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather
A textured ABS gasket assures a rigid linear seal to the mounting surface
Highly conductive while remaining flexible during high power applications
Pure Copper voice coil creates a strong magnetic field with a very thin extrusion
Kapton voice coil former is lightweight and efficiently dissipates heat
Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process
Over-coil cooling system allows air exchange over the voice coil through the spider
6dB internal crossover integrated into the design to assure smooth midrange to tweeter frequency transitions
Heavy gauge progressive-die stamped steel frames for ultimate rigidity
Ferrite maget motor creates a strong magnetic field while remaining small enough to fit nearly every application
Use spade connectors or solder direct for the best connection
1 inch tweeters produce clear highs while handling plenty of power without sound harsh
Specifications:
RMS power handling: 45 watts
Peak power handling: 90 watts
Speaker impedance: 4 ohms
Frequency response: 60-20kHz
Sensitivity: 88 decibals
Crossover point: 4kHz
Crossover slope: 12 decibals
Mounting diameter/cut out: 4.48
Outside diameter: 6.26
Mounting depth/chassis depth: 2
Color: Gray
Quantity: 2
Manufacturer warranty: 1-year warranty
Aluminum dome tweeters deliver great sound with increased reliability
Butyl rubber surrounds provide durability and deeper mid-bass impact
Lightweight thermal-formed polypropylene cones enable faster midrange response
The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather
A textured ABS gasket assures a rigid linear seal to the mounting surface
Highly conductive while remaining flexible during high power applications
Pure Copper voice coil creates a strong magnetic field with a very thin extrusion
Kapton voice coil former is lightweight and efficiently dissipates heat
Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process
Over-coil cooling system allows air exchange over the voice coil through the spider
6dB internal crossover integrated into the design to assure smooth midrange to tweeter frequency transitions
Heavy gauge progressive-die stamped steel frames for ultimate rigidity
Ferrite maget motor creates a strong magnetic field while remaining small enough to fit nearly every application
Use spade connectors or solder direct for the best connection
1 inch tweeters produce clear highs while handling plenty of power without sound harsh
Specifications:
RMS power handling: 45 watts
Peak power handling: 90 watts
Speaker impedance: 4 ohms
Frequency response: 60-20kHz
Sensitivity: 88 decibals
Crossover point: 4kHz
Crossover slope: 12 decibals
Mounting diameter/cut out: 4.48
Outside diameter: 6.26
Mounting depth/chassis depth: 2
Color: Gray

Specs

Size
5.25"
Car speaker size class
5.25"
Car speaker type
Tweeters
Rms power rating
45 W
Peak audio power handling
90 W
Speaker elements
2-Way

Current price is $66.99

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

2-Year Plan - $7.00

3-Year Plan - $11.00

How do you want your item?

Ships to

Arrives by Mon, Jun 1

Sold and shipped by Spreetail

4.32444888414648 stars out of 5, based on 44047 seller reviews(4.3)

Report an issue with this seller

Free 30-day returns

About this item

Product details

When you crank up your car or truck audio system, you want the best sound you can get. Get some of that top-notch sound you've been searching for with the Maxxsonics FKB116S MB Quart Formula 5.25-Inch 2-Way Car Speakers. The ideal balance of a high-end car audio system requires the perfect mix of speaker tone, deep bass impact, and clean undistorted power. With MB Quart we make it simple to develop the impeccable Formula for a great sounding system. The Formula line offers a high-end sound quality through a full line of aluminum dome tweeters with polypropylene cone speakers. These components can be matched with 400-watt peak power, dual 4-ohm subwoofers to command the deep bass frequencies all powered by the Q-Stasis circuitry amplifiers in the Formula line up. Keep your sound the best around with these speakers from Maxxsonics.

Quantity: 2
Manufacturer warranty: 1-year warranty
Aluminum dome tweeters deliver great sound with increased reliability
Butyl rubber surrounds provide durability and deeper mid-bass impact
Lightweight thermal-formed polypropylene cones enable faster midrange response
The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather
A textured ABS gasket assures a rigid linear seal to the mounting surface
Highly conductive while remaining flexible during high power applications
Pure Copper voice coil creates a strong magnetic field with a very thin extrusion
Kapton voice coil former is lightweight and efficiently dissipates heat
Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process
Over-coil cooling system allows air exchange over the voice coil through the spider
6dB internal crossover integrated into the design to assure smooth midrange to tweeter frequency transitions
Heavy gauge progressive-die stamped steel frames for ultimate rigidity
Ferrite maget motor creates a strong magnetic field while remaining small enough to fit nearly every application
Use spade connectors or solder direct for the best connection
1 inch tweeters produce clear highs while handling plenty of power without sound harsh
Specifications:
RMS power handling: 45 watts
Peak power handling: 90 watts
Speaker impedance: 4 ohms
Frequency response: 60-20kHz
Sensitivity: 88 decibals
Crossover point: 4kHz
Crossover slope: 12 decibals
Mounting diameter/cut out: 4.48
Outside diameter: 6.26
Mounting depth/chassis depth: 2
Color: Gray
Quantity: 2
Manufacturer warranty: 1-year warranty
Aluminum dome tweeters deliver great sound with increased reliability
Butyl rubber surrounds provide durability and deeper mid-bass impact
Lightweight thermal-formed polypropylene cones enable faster midrange response
The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather
A textured ABS gasket assures a rigid linear seal to the mounting surface
Highly conductive while remaining flexible during high power applications
Pure Copper voice coil creates a strong magnetic field with a very thin extrusion
Kapton voice coil former is lightweight and efficiently dissipates heat
Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process
Over-coil cooling system allows air exchange over the voice coil through the spider
6dB internal crossover integrated into the design to assure smooth midrange to tweeter frequency transitions
Heavy gauge progressive-die stamped steel frames for ultimate rigidity
Ferrite maget motor creates a strong magnetic field while remaining small enough to fit nearly every application
Use spade connectors or solder direct for the best connection
1 inch tweeters produce clear highs while handling plenty of power without sound harsh
Specifications:
RMS power handling: 45 watts
Peak power handling: 90 watts
Speaker impedance: 4 ohms
Frequency response: 60-20kHz
Sensitivity: 88 decibals
Crossover point: 4kHz
Crossover slope: 12 decibals
Mounting diameter/cut out: 4.48
Outside diameter: 6.26
Mounting depth/chassis depth: 2
Color: Gray

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Size

5.25"

Car speaker size class

5.25"

Car speaker type

Tweeters

Rms power rating

45 W

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.