Clear Front Euro Turn Signal Blinker Kawasaki Ninja ZX 6R 10R 14R 650 Z1000 ZG

Our Ninja Turn Signal Front Lamp Assembly are a direct OEM Replacement part, but without the OEM Dealer price. You may have to splice the wires into your current system. These Blinkers are also DOT approved with E-Mark (E-9) Certified raised stamped lenses. Includes Right and Left Assemblies with Sockets and Bulbs. Use your OEM hardware to install the marker lights onto your bike.

Stats:
Dimensions: OEM Style Direct Fitment
Base: High Impact Plastic
Lens: Clear High Impact Plastic
Bulb: Amber Incandescent, Single Filament, 12 Volt, 21 Watts
Wiring: Two Wire, 12 Volt Systems
Replaces OEM(R/L): 23040-0057 / 23040-0058

Fitment:
Kawasaki
06-08 EX650 Ninja 650R
07-12 ZX600 Ninja ZX-6R
06-07 ZX1000 Ninja ZX-10R
07-08, 10-12 ZR1000 Z1000
06-14 ZX1400 Ninja ZX-14
06-14ZX1400 Ninja ZX-14R
08-14 ZG1400 Concours 14

Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; most likely you will be removing your fairing to properly mount these Turn Signals. Locate the existing Turn Signal Wires on your Motorcycle and either unplug your current lights and plug in our turn signal lamp assembly or you may have to Splice them in. Test the light and ensure it functions properly prior to putting everything back together. If it's good, mount the lamp unit using your existing hardware and repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque your mounting screws when re-installing, it should be snugged, hand-tight and not forcefully clamped down.