Ancel FX3000 Automotive Four System Scanner OBD2 Scanner Oil EPB ABS Bleeding BMS SAS Reset Car Code Reader Automotive Diagnostic Scan Tool Automotive Scanner OBDII Code Scanner Full OBD2 Functions

ANCEL FX3000 is an upgraded version of FX2000, this scanning tool supports full OBD II test mode on engine system,transmission system, airbag system and ABS anti-lock braking system, reads and clears codes, and provides Real-time data flow chart for the 4 systems. In addition, it has 5 maintenance functions: Oil light reset, EPB reset, ABS reset, SAS reset, BMS reset. It can help car DIYers and professional mechanics to diagnose and maintain their vehicles more efficiently.

Four System Diagnostics:

Engine System: This scan tool helps you read fault codes and shows DTC definition to tell you what the problem is, and clear the error, turn off the MIL(Malfunction Indicator Light). Also, you can view live data stream, easily and fast find out the cause of engine system error.

Transmission System: If the automatic transmission warning light is on, FX3000 code reader will access and communicate with the transmission to tell you the running status of the sensors, read the error, turn off the warning light and read the live data stream, so you 'll know what is wrong exactly with the transmission system.

Anti-lock Brake System(ABS): FX3000 has the ability to retrieve ABS fault codes and tell you what the problem is through a visual inspection of all brake components, and then clear the codes. It also allows you to monitor and diagnose the operating conditions of the ABS to ensure that the repairs are effective and complete.

Supplemental Restraint System(SRS): It's a non-negligible signal that the SRS light is on, which means the safety system isn't working at 100% and maybe the airbag is disabled. This scanner can check the errors and clear the codes, view real-time live data to monitor the SRS run status, and turn off the warning light. (CAN NOT reset the SRS module).

Five Maintenance Functions:

Oil Light Reset: This diagnostic tool performs reset for the Engine Oil Life system which calculates an optimal interval of the oil change on the base of the vehicle driving conditions and climate. You need to reset the engine oil life to 100% after oil change every -time.

Steering Angle Sensor (SAS) Calibration: When the ESC (electronic stability control) light is on, it can diagnose and allow you to reset the SAS after an alignment is performed or parts in the steering system are replaced. The fault memory of the steering angle sensor will be cleared automatically once the SAS calibration completed.

Electric Parking Brake (EPB) Reset: FX3000 scan tool is used to release the rear electric parking brake unit when replacing rear pads or discs so that the caliper piston can be moved back. It can also clear codes and turn off the EPB light when the replacement is done.

Anti-lock Braking System (ABS) Bleeding: When the indicator light of the ABS is lit on your vehicle and needs to be reset, FX3000 can trace down the cause which triggered the indicator light of the anti-lock brakes, read and reset the codes,reset the brake indicator after replacing or repairing.

Battery Registration: FX3000 allows you to perform a reset on the vehicle battery for clearing the fault information to re-match the new battery into ECU once you replace the battery.