EHXCANYON
- Electro-Harmonix Canyon Delay and Looper Pedal
- 9.6V DC 200mA Power Adapter
- Owner's Manual
- Warranty Documentation
Electro-Harmonix Canyon Delay & Looper
Jaw-dropping, cavernous delays in a compact package!
Packed with more power than pedals taking up more real estate, the compact EHX Canyon Delay & Loopers features a collection of awe-inspiring effects. From pristine digital delay to warm and warbly tape echo, reverse and modulated delays, cascading octave delay and shimmer… even an exquisite Deluxe Memory Man emulation. There are ten different effects in all plus a fully featured looper. Internal or external Tap Tempo with tap divide and a chasm full of intuitive secondary knob controls deliver a truly grand experience.
Features 11 modes:
1. ECHO: digital delay
2. MOD: modulated delay
3. MULTI: multi-tap delay
4. REVRS: reverse delay
5. DMM: Deluxe Memory Man
6. TAPE: tape delay
7. VERB: reverb plus delay
8. OCT: octave delay
9. SHIM: shimmer
10. S/H: sample and hold
11. LOOP: looper mode w/max loop length of 62 seconds
Product Highlights:
Delay time of 5 milliseconds to 3 seconds
Tap Tempo with tap divide using the built-in footswitch or an external footswitch
Tails switch allows you to choose whether echoes repeat or stop immediately when the pedal is switched to bypass
Easy access to “hidden” parameters thru Secondary Knob Mode
Power adapter included
Product Features:
FX LVL Knob: Controls the output volume of the delay effect.
Delay Knob: Controls the delay time, from a minimum position of 5 milliseconds to a maximum of 3 seconds.
Mode Knob: An 11-position rotary switch that selects which delay mode is active.
Feedback Knob: Controls the number of repeats of the delayed signal.
Tap/Divide Switch: Controls the Tap Divide setting. When the delay time is set using tap tempo this button controls the division of the tapped tempo.
Output Jack: This 1/4" jack is the audio output of the CANYON.
Input Jack: This is the audio input.
Tap In Jack: Connect an external momentary footswitch to control the delay time by tapping in a tempo.
Footswitch: Press this footswitch to switch the pedal between bypass and effect modes. The footswitch can also be used to set the delay time by tapping it at least two times.
Product Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions ...
