SparkFun XBee Explorer Regulated

Key Features

• Translates the 5V serial signals to 3.3V to connect a 5V (down to 3.3V) system to any XBee module
• Designed to mate directly with the SparkFun Arduino Pro series of boards
• Works with all XBee modules including the Series 1 and 2, standard and Pro versions
• Direct access to the serial and programming pins on the XBee unit

The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with the SparkFun Arduino Pro series of boards for wireless bootloading and USB based configuration.

This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V. In the latest revision the diode level shifter is replaced with a more robust MOSFET level shifter.

Item Specifics
Fully populated with 3.3V regulator (5V max input)
1-XBee socket
Four status LEDs
Basic soldering skills required
This board does not include XBee module.
Note: This board cannot source the power required for the Cellular XBee line. It will only work with the 802.15.4 variants.