6.5 in. Pre-Loaded 250W RMS 2 Ohm Powered Subwoofer

The BG-6 Pre-Loaded Subwoofers are rated at 250 Watts RMS with an internally wired 1.5 Inch 2 Ohm voice coil final configuration. These subwoofers use tight Red stitching that's sewn through a UV treated non-pressed paper cone onto a EROM foam surround. Then it's bonded to a heavy gauge steel basket that's bolted to double stacked high flux Y30 70oz Strontium Ferrite magnets with a 10mm top plate. Then everything dances on a springy poly cotton spider with high powered woven tinsel leads that connect to spring loaded 5-way binding nickel plated speaker connectors. These woofers are powered by a custom built amplifier designed especially for the Subwoofers ensuring accurate power in an enclosure tuned perfectly for our GTX Series Subwoofers

• Heavy gauge Steel Basket with Industrial Texture Painting
• Dual Stacked High Flux Y30 70oz Strontium Ferrite Magnets
• Dual Impedance / 1.5" 4 Layer Hi-Temp Voice Coil
• Poly Cotton Spider with Woven Round Tinsel Leads
• UV Treated / Non-Pressed Paper Cone with EROM Foam Surround
• Round Shape PP Vacuum Dust Cap
• 10mm Top Plate / 18mm X-MAX
• Customized Rubber Gasket & Magnet Boot
• Black Anodized Deep Steel Woofer Bars
• Dual Impedance Black Anodized Former
• 5 Way Binding Push Terminals
• High Quality Industrial Grade Carpet

• Size: 6.5"
• Watts RMS: 250w
• Peak Power: 500w
• Cone: UV Treated / Non-PressedPaper
• Voice Coil: 1.5" Dual 4 Ohm
• Surround: EROMFoam
• Magnet: 70oz
• Terminals: 5 Way Binding Push Terminals
• Basket: Heavy Gauge Steel
• Tinsel Leads: Woven Round
• X-Max: 9mm (1-way) + 10mm Top Plate
• SPL: 88 dB @2.83V/1m
• FS: 58.8Hz