Sandbaggy - 11" x 48" Long-Lasting Sandbags - Lasts 1-2 Yrs - For Flooding Sand Bag- Flood Water Barrier - Store Bags (Sand NOT INCLUDED) (5 Bags)

Heavy duty, with UV protection: These rugged long-lasting sandbags are made for heavy-duty applications & can sit under direct sunlight for up to three years before they begin to degrade. Compared to standard sandbags with a 6 month life, these long-lasting sandbags can last 2-3 times as long. These structurally durable sandbags will not rupture even if they are driven over by cars. Manufactured from high-density polyethylene materials, each strand is a single filament. The non-deformable filaments are woven in a specific pattern and fusion welded for extra strength. Excellent for heavy duty applications like sandbagging, landscaping and construction.

Sandbags Filling Tips:

1. Fill sandbags 1/2 to 2/3 full and tie the bag at the top (lay flat when in place). This sandbag should weigh between 35-40 lbs. An overfilled sandbag weighs between 60-75 lbs and will leave gaps which will allow water to seep through.
2. Always wear gloves during the filling operation to avoid hand injuries and protect from contaminants in sand and floodwater. Safety goggles should be used on dry and windy days. Filling sandbags is physically demanding work and can easily cause back and other injuries if not careful. Always lift with your legs and not your back. Do not reach out, bend over, or twist when lifting.
3. Do not throw sandbags - it stresses the back and shoulders. Rather, use a brigade line to pass bags.
4. Use a short handled, #2 rounded point shovel with straight shaft and D grip, bagger scoop or funnel to fill sandbags.
5. Remove any debris from the areas where the sandbags will be placed. After placing the sandbag, walk on the sandbags to create a tight seal between each bag.

Fill Materials

• Sandbaggy monofilament sandbags are built to be filled with gravel. Be aware of poor quality sandbags that rupture when filled with sharp gravel rocks.