12V Solar Submersible Pump Deep Well Water DC Pump Stainless Steel 1500L/H

Description

If you're looking for an efficient and simple irrigation solution, take a look at our submersible pump, a jewel in the world of irrigation technology for its performance and ease of operation. The efficient performance and low-noise operation of this submersible pump will provide your farmland with a constant flow of living water, making every inch of soil come alive, which is undoubtedly the ideal choice for scientific irrigation and improved agricultural efficiency.

Details

Rope Hole: You can use nylon rope or steel wire(not included) to pass through the rope hole and pull this product, making it easy to use.

Standard Water Outlet: The pump adopts a 0.98inch large diameter water outlet, which can be matched with different types of water pipes and is very practical.

Fine Water Inlet: It helps to provide all-round water intake.

High-quality Screw: It makes this product less prone to thermal expansion and contraction, reduces noise, and improves work efficiency.

Application

This product is suitable for extracting groundwater from deep wells, and can also be used in water-lifting projects of rivers, reservoirs, canals, and so on. It can be used for farmland irrigation, and water for humans in mountainous areas, villages, homes, farms, campervans, cities, factories, and railways.

Specifications

Material: 304 Stainless Steel, All-copper

Color: Silver and Red

Assembly Required: Yes

Voltage: DC12V

Current: 8.0A

Power: 250W

Speed: 3500r/min

Maximum Delivery Lift: 30m/98.43ft

Cable Length: 7m/22.97ft

Maximum Flow Rate: 1.5m³/396.26gal/h

Outlet Diameter: 25mm/0.98in

Gross Weight: 3.3kg/7.28lbs

Product Height: 38cm/14.96in

Package Size: 40*9*13cm/15.75*3.54*5.12in

Package Included

1* Submersible Pump

Notes

• Please check that the voltage corresponds to local standards before ordering.
  
  
  
  
  
• Please do not use it without water. It requires vertical installation, and it is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, please make sure your water is clear before you install it.
  
  
  
  
  
• This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system, you need to use at least one external check valve in the pipe, the valve in the pump won't fulfill that function.
  
  
  
  
  
• Please note that when this product is in operation, the pump body should be completely immersed in water to avoid burning the machine.
  
  
  
  
  
• Please pay attention to the precautions on the label of this product.
  
  
  
  
  
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.