X8R GLOVE BOX LID HINGE SNAPPED REPAIR KIT "Z" BRACKETS FIX COMPATIBLE WITH AUDI A4 S4 RS4 B6 B7 8E & SEAT EXEO / ST 3R5 (2009-2014), PART # X8R65 / X8R0065
(No ratings yet)
Key item features
- X8R GLOVE BOX LID HINGE SNAPPED REPAIR KIT "Z" BRACKETS FIX COMPATIBLE WITH AUDI A4 S4 RS4 B6 B7 8E & SEAT EXEO / ST 3R5 (2009-2014), PART # X8R65 / X8R0065
Part # X8R65 / X8R0065.Brand: X8R.
- BEFORE PURCHASING PLEASE CHECK OUR LISTING CAREFULLY AS FOR THE BRACKETS SHAPE.
DUE TO THE EXISTENCE OF TWO DIFFERENT BRACKETS' MODIFICATION
(Z SHAPE AND L SHAPE) PLEASE MAKE SURE THE REPAIR KIT WILL FIT YOUR VEHICLE.
YOU CAN SEE THE SHAPE OF BRACKETS OUR REPAIR KIT WILL FIT
BY WATCHING THE MEDIA PROVIDED IN OUR LISTING.
- SYMPTOMS OF FAULTSymptoms are very obvious; a snapped or broken glove box hinge. Sometimes just one is snapped however it is worthwhile fitting our brackets to both hinges to prevent the second hinge from snapping.
- THE FAULTThe hinges on the glove box lid are prone to snapping; rendering the glove box unusable. This is a very common fault.The glove box lid on the models listed have a damper fitted to allow the lid to drop gently. Unless periodically lubricated the damper will become stiff and put excess pressure on the glove box hinge when opening the lid. This eventually causes the weak glove box lid hinges to break, this is an extremely common fault. The hinges on the lid are very weak so even with a smooth damper it is possible to break the hinges. The only solution the vehicle manufacturer’s offer is a new glove box unit which is extremely expensive, unfortunately these are also fitted with the same hinges that will just fail again.
- THE SOLUTIONFit our unique design brackets and re-secure the hinges to your glove box lid, restoring use of your glove box.Fit our brackets to securely reattach the hinges to the glovebox lid, restoring the use of the glove box with no need to replace the glove box at vast expense. A replacement glove box from the vehicle manufacturer would just fail again due to the poor quality hinges. Install is very simple and full pictorial instructions are shown on this listing. Our high grade steel brackets are extremely strong and are reinforced at 3 points to ensure rigidity. Black coated in order to blend in with glovebox lid to retain an authentic look. Our brackets unlike others are manufactured to fit the contours of the glove box hinge to provide a secure fit. The section of our bracket which fits the glove box lid is also curved to fit the contours of the lid unlike others. Countersinks are also present on our brackets to enable the retaining screws to sit flush on the bracket. Each bracket fastens at 4 points for extra security. Fit our brackets to restore full function to your glove box lid permanently. Our kit also includes 2x hinge pins replacing the originals which can sometimes be damaged. The ideal solution to a very common fault.
- VEHICLES AFFECTED
AUDI
(This bracket is NOT compatible with any convertible models)
A4 B6 2002 - 2005, B7 2006 - 2008.
RS4 B7 2006 - 2008.
S4 B6 2003–Dec 2004, S4 B7 2004–Jun 2008.
SEAT
(This bracket is NOT compatible with any convertible models)
Seat Exeo/ST 3R5 (2009-2014).
Associated part numbers:
8E2857131, 8E2857035, 8E0880802, 8E2880324.
- YOU WILL RECEIVE2 x Black Shaped Brackets;8 x Black screws;2x Hinge pins.
Specs
- Vehicle modelAUDI A4 S4 RS4 B6 B7 8E
- Vehicle year2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
- Vehicle makeAudi
- Vehicle fitment typeSpecific
- BrandX8R
- MaterialStainless Steel
Current price is USD$23.00
Price when purchased online
- Free shipping
Free 30-day returns
How do you want your item?
Columbus, 43215
Arrives by Sat, Apr 18
|
Sold and shipped by LRNJ Autoparts Inc
5 stars out of 5, based on 1 seller review(5.0)1 seller review
Free 30-day returns
About this item
Product details
X8R GLOVE BOX LID HINGE SNAPPED REPAIR KIT "Z" BRACKETS FIX COMPATIBLE WITH AUDI A4 S4 RS4 B6 B7 8E & SEAT EXEO / ST 3R5 (2009-2014), PART # X8R65 / X8R0065 ***** BEFORE PURCHASING PLEASE CHECK OUR LISTING CAREFULLY AS FOR THE BRACKETS SHAPE. DUE TO THE EXISTENCE OF TWO DIFFERENT BRACKETS' MODIFICATION (Z SHAPE AND L SHAPE) PLEASE MAKE SURE THE REPAIR KIT WILL FIT YOUR VEHICLE. YOU CAN SEE THE SHAPE OF BRACKETS OUR REPAIR KIT WILL FIT BY WATCHING THE MEDIA PROVIDED IN OUR LISTING. ***** SYMPTOMS OF FAULT. Symptoms are very obvious; a snapped or broken glove box hinge. Sometimes just one is snapped however it is worthwhile fitting our brackets to both hinges to prevent the second hinge from snapping. *** THE FAULT. The hinges on the glove box lid are prone to snapping; rendering the glove box unusable. *** THE SOLUTION. Fit our unique design brackets and re-secure the hinges to your glove box lid, restoring use of your glove box. ***** VEHICLES AFFECTED: - AUDI (This bracket is NOT compatible with any convertible models) A4 B6 2002 - 2005, B7 2006 - 2008. RS4 B7 2006 - 2008. S4 B6 2003–Dec 2004, S4 B7 2004–Jun 2008. - SEAT (This bracket is NOT compatible with any convertible models) Seat Exeo/ST 3R5 (2009-2014). *** Associated part numbers: 8E2857131, 8E2857035, 8E0880802, 8E2880324. ***** YOU WILL RECEIVE: 2 x Black Shaped Brackets; 8 x Black screws; 2x Hinge pins.
- X8R GLOVE BOX LID HINGE SNAPPED REPAIR KIT "Z" BRACKETS FIX COMPATIBLE WITH AUDI A4 S4 RS4 B6 B7 8E & SEAT EXEO / ST 3R5 (2009-2014), PART # X8R65 / X8R0065
Part # X8R65 / X8R0065.Brand: X8R.
- BEFORE PURCHASING PLEASE CHECK OUR LISTING CAREFULLY AS FOR THE BRACKETS SHAPE.
DUE TO THE EXISTENCE OF TWO DIFFERENT BRACKETS' MODIFICATION
(Z SHAPE AND L SHAPE) PLEASE MAKE SURE THE REPAIR KIT WILL FIT YOUR VEHICLE.
YOU CAN SEE THE SHAPE OF BRACKETS OUR REPAIR KIT WILL FIT
BY WATCHING THE MEDIA PROVIDED IN OUR LISTING.
- SYMPTOMS OF FAULTSymptoms are very obvious; a snapped or broken glove box hinge. Sometimes just one is snapped however it is worthwhile fitting our brackets to both hinges to prevent the second hinge from snapping.
- THE FAULTThe hinges on the glove box lid are prone to snapping; rendering the glove box unusable. This is a very common fault.The glove box lid on the models listed have a damper fitted to allow the lid to drop gently. Unless periodically lubricated the damper will become stiff and put excess pressure on the glove box hinge when opening the lid. This eventually causes the weak glove box lid hinges to break, this is an extremely common fault. The hinges on the lid are very weak so even with a smooth damper it is possible to break the hinges. The only solution the vehicle manufacturer’s offer is a new glove box unit which is extremely expensive, unfortunately these are also fitted with the same hinges that will just fail again.
- THE SOLUTIONFit our unique design brackets and re-secure the hinges to your glove box lid, restoring use of your glove box.Fit our brackets to securely reattach the hinges to the glovebox lid, restoring the use of the glove box with no need to replace the glove box at vast expense. A replacement glove box from the vehicle manufacturer would just fail again due to the poor quality hinges. Install is very simple and full pictorial instructions are shown on this listing. Our high grade steel brackets are extremely strong and are reinforced at 3 points to ensure rigidity. Black coated in order to blend in with glovebox lid to retain an authentic look. Our brackets unlike others are manufactured to fit the contours of the glove box hinge to provide a secure fit. The section of our bracket which fits the glove box lid is also curved to fit the contours of the lid unlike others. Countersinks are also present on our brackets to enable the retaining screws to sit flush on the bracket. Each bracket fastens at 4 points for extra security. Fit our brackets to restore full function to your glove box lid permanently. Our kit also includes 2x hinge pins replacing the originals which can sometimes be damaged. The ideal solution to a very common fault.
- VEHICLES AFFECTED
AUDI
(This bracket is NOT compatible with any convertible models)
A4 B6 2002 - 2005, B7 2006 - 2008.
RS4 B7 2006 - 2008.
S4 B6 2003–Dec 2004, S4 B7 2004–Jun 2008.
SEAT
(This bracket is NOT compatible with any convertible models)
Seat Exeo/ST 3R5 (2009-2014).
Associated part numbers:
8E2857131, 8E2857035, 8E0880802, 8E2880324.
- YOU WILL RECEIVE2 x Black Shaped Brackets;8 x Black screws;2x Hinge pins.
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
Specifications
Vehicle model
AUDI A4 S4 RS4 B6 B7 8E
Vehicle year
2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Vehicle make
Audi
Vehicle fitment type
Specific
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Customer ratings & reviews
0 ratings|0 reviews
This item does not have any reviews yet
Related pages
- Mercedes-benz C Hood Safety Catch
- Mercedes-benz E Hood Safety Catch
- Bmw 750 Hood Latch
- Bmw 540 Hood Latch
- Mercedes-benz C Hood Release Handle
- Bmw 325 Hood Latch
- Racing Roll Cages & Roll Bars
- Volkswagen Interior Parts & Accessories Parts
- BMW Interior Parts & Accessories Parts
- BMW Audio, Video & Security Parts
- Automotive Seat Brackets & Hardware
- Steering Columns & Components