Feature:
1. Rubber Material: Made of rubber material, it has air tightness, temperature resistance and anti aging, which greatly improves the service life.
2. Effectively Reduce Impact: The rubber tire inner tube can effectively absorb the impact of uneven road, ensuring driving comfort, speed and .
3. Lengthened Valves Design: Lengthened valves eliminate the need to replace valve cores and can be reused to help tires inflate quickly.
4. Easy to Install: Old tire inner tubes can be replaced in minutes, easy to install, convenient and efficient saving your time and efficiency.
5. Scope of Application: The 14x2.125 inner tube has a wide range of applications and is suitable the replacement of electric vehicles, motorcycles and tricycles.
Specification:
Item Type: Electric Vehicle Inner Tube
Material: Rubber
Color: As Pictures Shown
Weight: Approx. 193g / 6.8oz
Applicable : Electric Vehicles, Motorcycles, Tricycles
Note:
1. Confirm that the specifications of the inner tube are consistent with the inner tube. Each inner tube is equipped with a valve, nut and rubber that can withstand the load. When installing the inner tube into the outer tire, please carefully check whether there is sand in the inner space of the outer tire and whether the outer tire is There are cracks or other adverse factors
2. When the inner and outer tires are installed on the rim, please check the rim in detail to ensure that there are no adverse factors on the rim, no deformation, no bending, and no debris. Please use the lining belt to cover the loose and rough strip or other surfaces that will damage the inner and outer tires.
3. Please use a wrench to tighten the nut carefully, do not use some incisive tools. Tighten the screws such as a screwdriver, they will damage the inner tube or the bead of the outer tire. When the tire is high speed driving, it is recommended to use RIMLOCK added .
4. When the inner and outer tires have been installed on the steel , please be very careful, and do it properly, the valve is correctly locked on the steel , and the steel is exposed inflation, and the inner tube is not clamped between the outer tire and the steel . between
5. The inner and outer tires have been installed on the rim, inflate the inner tube with 10PSI, then stop inflating, and check whether the inner and outer tires are properly locked on the rim, and then you can press the air pressure recommended by the manufacturer marked on the bead of the outer tire inflating, the rim line on the tire must be visible outside the steel .
6. Do not too much or too little, this will cause the valve and the inner tube to fall off and cause an accident, please check whether the air pressure is at a normal level, please check the valve to prevent air leakage, and lock the valve tightly.
7. It is forbidde to store the inner tube together with the flammable and chemically corrosive items such as oil, and it must be kept away from heat sources.
