4 Wheel Adapters 5x4.5 to 6x4.5 | 5x114.3 to 6x114.3 | Fits 5x4.5 Vehicle Hub with 66.1mm Lip to Hub Centric Fit Nissan Frontier Pathfinder Wheels 2005-After

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 4.5-inch (114.3mm) bolt pattern hub to fit wheels of 6 lug 4.5-inch (114.3mm) bolt pattern. Adapters are built with 66.1mm hub centric lip. For wheels with 66.1mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 billet, featured in high capacity and corrosion resistance. High quality studs are pre-installed. Sold as a set of 4 for all four wheels. Hub centric design for a snug fit on factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 5x4.5 Pattern Hub or the Following Vehicles: Fits Ford: Mustang (All 5 lug), Explorer, Ranger, Bronco (82-90), Crown Victoria Fits Jeep: Cherokee (80-01), Grand Cherokee (93-98), Wrangler (80-06), Liberty (02-on) Fits Toyota: Camry (92-on), Solara (99-on), Mr-2 (9--95), Supra (93-96), Supra and more... Hub Centric Fit for Factory Wheels (or 66.1mm Bore wheels) from These Vehicles: Compatible with Nissan Pathfinder 05-12, Xterra 05-15 **Even if your 6 lug 4.5-inch (114.3mm) bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 5x4.5-inch (114.3mm) Wheel Bolt Pattern: 6x4.5-inch (114.3mm) Studs Thread Size: 1/2" Hub Bore Size: 73mm Hub Centric Lip: 66.1mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is a must to shorten the factory studs.