GELUOXI Control Board for GE Refrigerator Main Control Board /Motherboard WR55X10942C AP7188100

Overview

Brand: GELUOXI

Part Type: Control Board

OEM Part Number: WR55X10942, WR55X10942C, 200D4850G022, WR55X10942P, AP7188100

Fits and performs reliably like the original one. Plug and play installation.

Made of high-quality materials and precision-engineered to fit specific models.

Closely inspected before leaving the factory. Product Warranty: 24 Months.

Please check the model/year/part NO. and pictures we provided before purchasing.

OEM Part Number:

WR55X10942,WR55X10942C,200D4850G022,WR55X10942P

AP7188100, WR55X10416, WR55X10942C, WR55X10942

WR55X10942P, WR49X10060, WR55X10024, WR55X10037

WR55X10090, WR55X10109, WR55X10187, WR55X10335

WR55X10385, WR55X10523 , WR55X10524 ,WR55X10543

WR55X10552, WR55X10554 ,WR55X10558 , WR55X10589

WR55X10597 ,WR55X10614 , WR55X10616 , WR55X10626

WR55X10656 , WR55X10659 , WR55X10722, PS2364946, AP4436216 etc.

Fits For the Following:

Replacement for GE refrigerator motherboard

Replacement for GE refrigerator main control board

Replacement for GE refrigerator & Hotpoint & Americana

How to install:

STEP1: Disconnect power to the refrigerator and remove existing main board. TOOLS:1/4” nut driver,wire cutters (for some models)

STEP2：Eliminate thermistor wire in pin 2 of J1 connector (see note below) if no wire in pin2, proceed to step 3.

Note: This step is ONLY applicable for the following models: ALL BOTTOM FREEZER models
ENCODE models with the following serial number prefixes：TD2 VD2 ZD2 AF2 DF2 FF2 GF2 HF2 LF2 MF2 RF2 SF2

STEP3: Install new main board.

(1) Reconnect the electrical connectors by gently pushing the connectors onto the terminals

(2) The connectors on the new board may be in a different order/place than the old board

(3) When replacing back panel,make certain to capture eyelet of ground wire with back panel screw.

(4) Make sure the ground wire is not pinched by the back panel and is within the enclosure.

STEP4: Cut green wire in capacitor board (ONLY Replacement for BOTOM FREEZER model)

STEP5: Check operation.Make sure the compressor and evaporator fan turn on.Check that the temperature board is functioning.