EZAccessory 2 Wheel Adapters 6x5.5 to 5x4.75 (5x120.7) Thickness 2 Inch with 70.3mm Hub Centric Lip

Product Information: These two piece conversion type wheel adapters are used to convert 6 lug 5.5-inch (139.7mm) bolt pattern hub to fit wheels of 5 lug 4.75" (120.7mm) bolt pattern. Adapters are built with 70.3mm hub centric lip to support 5 lug 4.75" bolt pattern wheels for a possible snug fit. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 6x5.5 (139.7mm) Hub Or Fit the Following Vehicles: Fits Chevrolet: C/K 1500 2/4WD (99-01), Silverado (99-on), Sierra (99-on), Avalanche (01-on), Tahoe, Yukon (95-on), Fits GMC: K1500 4WD (88-on), GMC - Denali (98-on) Fits Toyota: Tacoma 4WD (95-on), Sequoia 4WD (01-on), Tundra (99-06), 4-Runner (86-on) Hub Centric Fit for Factory Wheels (or 70.3mm Bore wheels) Compatible with These Vehicles: Chevrolet: Corvette (68-2019), Impala, Caprice (77-87) Pontiac: All Mid Size (Grand Prix, GTO, Lemans, etc) (64-87), Trans Am (67-97) Even if your 5x4.75" (120.7mm) bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by finding right size hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 6x5.5-inch (139.7mm) Wheel Bolt Pattern: 5x4.75-inch (120.7mm) Studs Thread Size: 12x1.5 Hub Bore Size: 108mm Hub Centric Lip: 70.3mm Thickness: 2-inch (50mm) Lug Torque: 80 ft-lbs Black Allen Bolt Torque: 55 ft-lbs