EZAccessory 2 Wheel Adapters 6x135 to 8x170 Thickness 2 Inch with 125mm Hub Centric Lip

Product Information: These two piece conversion type wheel adapters are used to convert 6 lug 135mm bolt pattern hub to fit wheels of 8 lug 170mm bolt pattern. Adapters are built with 125mm hub centric lip to support F250 or F350 Super Duty wheels for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Snug Fit on 6x135mm Hub Or the Following Vehicles/Axles: Ford: Expedition (05-on), F150 Truck (05-on) Lincoln: Mark (06-08), Navigator (03-on) Hub Centric Fit for Factory Wheels (or 125mm Bore wheels) from These Vehicles: Ford: Super Duty F250 (03-on), F350 (03-on) For Ford Super Duty F250 F350 (99-02) - contact us before purchase; lug nuts changes are required Adapter Specification: Vehicle Bolt Pattern: 6x135mm Wheel Bolt Pattern: 8x170mm Studs Thread Size: 14x1.5 Hub Bore Size: 87mm Hub Centric Lip: 125mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.