EZAccessory 2 Wheel Adapters 5x4.5 to 6x135 Hub Centric Fit For 6 Lug F150 With 87mm Bore Thickness 2 Inch

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 4.5-inch (114.3mm) bolt pattern hub to fit wheels of 6 lug 135mm pattern. Adapters are built with 87mm hub centric lip. If your wheels have 87mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Hub centric design for a snug fit for factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 5x4.5 Pattern Hub or the Following Vehicles: Fits Ford: Mustang (All 5 lug), Explorer, Ranger, Bronco (82-90), Crown Victoria Fits Jeep: Cherokee (80-01), Grand Cherokee (93-98), Wrangler (80-06), Liberty (02-on) Fits Toyota: Camry (92-on), Solara (99-on), Mr-2 (9--95), Supra (93-96), Supra Hub Centric Fit for Factory Wheels (or 87mm Bore wheels) from These Vehicles: Compatible with Ford: 6 lug F150, 6 lug Expedition Compatible with Lincoln: 6 lug Navigator **Even if your 135mm bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 5x4.5-inch (114.3mm) Wheel Bolt Pattern: 6x135mm Studs Thread Size: 14x2.0 Hub Bore Size: 73mm Hub Centric Lip: 87mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.