EZAccessory 4 Wheel Adapters 5x4.75 to 6x135 | 5x120.7 to 6x135 | Fits Chevy Corvette with Lip to Hub Centric Fit 6 Lug F150 Wheels

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 4.75-inch (120.7mm) bolt pattern hub to fit wheels of 6 lug 135mm pattern. Adapters are built with 87mm hub centric lip. If your wheels have 87mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a set of 4 for all four wheels. Hub centric design for a snug fit for factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 5x4.75 Pattern Hub or the Following Vehicles: Chevy: Camaro (67-02), Corvette, El Camino, S10 (82-04), Caprice (77-90) Pontiac: Trans Am Buick: Regal (78-87), Riviera (66-85) Hub Centric Fit for Factory Wheels (or 87mm Bore wheels) from These Vehicles: Ford: 6 lug F150, 6 lug Expedition Lincoln: 6 lug Navigator **Even if your 135mm bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 5x4.75-inch (120.7mm) Wheel Bolt Pattern: 6x135mm Studs Thread Size: 14x2.0 Hub Bore Size: 74mm Hub Centric Lip: 87mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.