EZAccessory 2 Wheel Adapters 5x150 to 6x5.5 Fits 5 Lug Toyota Tundra Hub with 78mm Lip for Hub Centric Fit of Chevy GMC 6 Lug Wheels

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 150mm bolt pattern hub to fit wheels of 6 lug 5.5-inch (139.7mm) bolt pattern. Adapters are built with 78mm hub centric lip. If your wheels have 78mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels. Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Snug Fit on the Following Vehicles/Axles with 110mm Hub: Toyota: 5 lug Tundra, Land Cruiser (98-on), Sequoira (08-on) Lexus: LX470, LX570 Hub Centric Fit for Factory Wheels (or 78mm Bore wheels) from These Vehicles: All Chevy/GMC 6x5.5 bolt pattern(1992-on, excluding Colorado, Canyon), Cadillac Escalade, Nissan Titan **Even if your 6x5.5 bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. Adapter Specification: Vehicle Bolt Pattern: 5x150mm Wheel Bolt Pattern: 6x5.5-inch (139.7mm) Studs Thread Size: 12x1.5 Hub Bore Size: 110mm Hub Centric Lip: 78mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs Technical Notes: If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.