Reufrbished 564 Printhead for 5468 C5388 C6380 D7560 309A C410 8558
Feature:
This is a cleaned, thoroughly tested and sealed Printhead for 564 ink.
If the print head can't print colors.Please take out the print head from your printer,and use a white tissues to touch the mouth of the print head.
If the color print on the tissues,it means not the fault of print head,and you need to continue to troubleshoot.
The print head is cleaned and tested, and may contain a protective Solution and moisture, but does not affect the use
This is Aftermarket Replacement Item But Not Genuine
Size:85x75mm
Specifications: 5-Slot
Type:564 Printhead
Compatible Models:
Compatible Part #'s: CN642A/CB326-30001/CB326-30002
Refurbished 564 Printhead
for PhotoSmart 7510 7515 7520
for PhotoSmart C309A C309G C309N C310A C410A C510A C310a C311a
for PhotoSmart B8550 C6340 C6350 C6380 D5445 D5460 D7560
for HP Photosmart B209A
Packing includes:
1 x 564 print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
