Product Description：
H13(Headlight) + 5202/H16(Fog Light)
Specifications
1. Light Type : H13(Headlight) + 5202/H16(Fog Light)
2. Input Power : 100W/set (50W/bulb)
3. LED Type : COB LED Chips
4. Luminous Flux : approx.10000lm/set (5000lm/bulb)
5. Operating Voltage : DC 9V-32V (fits 12V/24V vehicle)
6. Color Temperature : Cool White 6000K
7. IP Rate : IP68
8. Operating Temperature : (-40C) to (+80C)
9. Material : Aviation 6063 Aluminum Profile
10. Life-Span : 50,000Hrs+
11. Lamp base designed : Turbo designed
12. Installation : Plug and Play
13. Beam Angle : 360°
Package Content:
4pc led Bulb
H13(Headlight) + 5202/H16(Fog Light)
Notes:
Please check the correct size when place order, if you're not sure which size to choose, please send message to us with your vehicle make, model, year, we'll recommend correct bulb size to you.
Please note for some of Germany cars, the car need some special adaptor to fix the LED bulbs (Normally H7 and H1 need special adaptor).
Automotive LED headlamps advantages:
Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
Install Caution：
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
FREQUENTLY ASKED QUESTIONS OF LED
1.Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again.
2)please exchange the bulbs from side to side and see if the problem could solve.
3)Please check your connection and fuse.
4)If still could not help, please contact our customer service, we will get back to you within 48 working hours.
