(2.2 GPH) - 12 Plant Drip Grow Kit - Starter Hydroponics Irrigation Bubbler / Manifold Kit - Includes 100'ft 1/8" Distribution Tubing, Emitter Stakes, Manifold & Plugs (Pots Sold Separately) (2.2 GPH)

The twelve outlet drip irrigation manifold head with ½ inch FPT utilizes extremely accurate pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Features Constructed with 12 built-in individually pressure compensating drip emitters Self-flushing emitters allow passage of water and minimize clogging Interchangeable drip emitters for variable flow rates in a single head Color-coded drip emitters and barbs easily identify flow rate at each zone Each drip emitter individually filtered (approx. 80 mesh) Backup mini-disk filter Rugged materials to withstand the most adverse conditions Install above grade or place below grade in a 6” emitter box Inlet plugs provide the option to cap off up to eight drip emitters kits contain 100’ of 1/8” distribution tubing, accessories, stakes and 1/4” converter barbs allowing the use of 1/4” distribution tubing Specifications Flow rates: .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 L/H) Pressure compensating range: 8-80 PSI (.5 - 5.6 BAR) Recommnded operating pressure: 15-50 PSI (1 - 3 BAR) Inlet size: 1/2” FNPT Use with 1/8” (.187 OD) or 1/4” (.150 - .160 ID) distribution tubing Materials: Body and cover: high impact plastic Filter: nylon Diaphragm: silicon Filter requirement: minimum of 120 mesh Dimensions Dimensions: 3” W x 2” H (7.6 cm W x 5 cm H)