For GMC Sierra 1500 2014-2015 Headlights 9012 High/Low Beam 2pc

Our LED bulbs is to replace halogen headlamps.
But can not replace the HID headlamps. Please double check before order, thank you.

 
Specification:

Headlight:
Socket type: 9012
Color temperature: 6000K White
Manufacturer Part Number:K9 LED headlight
Wattage: 200W/Pair，100W/Bulb
Hight luminous efficacy Flux：11000LM/Pair 5500LM/Bulb
Waterproof: IP68.
Life span: >50,000hrs
Voltage:9V to 36V.Wide-range voltage，constant urrent control，anti-interference circuit design.
Apprication:Upgrade for Car，Truck，SUV，RVHeadlight，ALL IN ONE Style, no extra driver needed .
Long range：6000K color temperature and 200m light range.

 
Description:
1. High brightness: The latest COB with 6000K White LED chip; 200% brighter than the existing halogen headlights.
2. Strong heat dissipation: equipped with highly silent heat dissipation fan, speed up to 12000/min, heat dissipation efficiency, can avoid temperature accumulation on the beads, prolong the service life of the beads.
3. Simple Installation: Installation only takes 10 minutes. There is no relay. There is no capacitor. No additional wiring. Plug and play.
4. IP68 waterproof: using integrated radiator and aluminium body self-cooling, waterproof and heat-proof. Even in extreme cases, the enclosure of the rainproof driver can work properly. Automatic short circuit protection.
5. Luminous on all sides: 360 ° no dead angle
 
 
Package Included:
2pcs LED Headlight Bulbs

 
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.